Product overview
STM8S003K3 STM8S003F3
External trigger input
•
•
•
Trigger from TIM1 TRGO
End of conversion (EOC) interrupt
4.14
Communication interfaces
The following communication interfaces are implemented:
UART1: Full feature UART, synchronous mode, SPI master mode, Smartcard mode, IrDA
mode, single wire mode, LIN2.1 master capability
•
SPI : Full and half-duplex, 8 Mbit/s
I²C: Up to 400 Kbit/s
•
•
4.14.1
UART1
Main features
One Mbit/s full duplex SCI
•
SPI emulation
•
High precision baud rate generator
•
Smartcard emulation
•
IrDA SIR encoder decoder
•
LIN master mode
•
Single wire half duplex mode
•
Asynchronous communication (UART mode)
Full duplex communication - NRZ standard format (mark/space)
•
Programmable transmit and receive baud rates up to 1 Mbit/s (fCPU/16) and capable of
following any standard baud rate regardless of the input frequency
•
Separate enable bits for transmitter and receiver
•
Two receiver wakeup modes:
•
Address bit (MSB)
-
Idle line (interrupt)
-
Transmission error detection with interrupt generation
•
Parity control
•
Synchronous communication
Full duplex synchronous transfers
•
SPI master operation
•
8-bit data communication
•
Maximum speed: 1 Mbit/s at 16 MHz (fCPU/16)
•
LIN master mode
Emission: Generates 13-bit synch break frame
•
Reception: Detects 11-bit break frame
•
16/100
DocID018576 Rev 3