Functional overview
STM32F302xx/STM32F303xx
3.18
Inter-integrated circuit interface (I2C)
2
Up to two I C bus interfaces can operate in multimaster and slave modes. They can support
standard (up to 100 KHz), fast (up to 400 KHz) and fast mode + (up to 1 MHz) modes.
Both support 7-bit and 10-bit addressing modes, multiple 7-bit slave addresses
(2 addresses, 1 with configurable mask). They also include programmable analog and
digital noise filters.
Table 4.
Comparison of I2C analog and digital filters
Analog filter
Digital filter
Pulse width of
suppressed spikes
Programmable length from 1 to 15
I2C peripheral clocks
≥ 50 ns
1. Extra filtering capability vs.
standard requirements.
Benefits
Available in Stop mode
2. Stable length
Disabled when Wakeup from Stop
mode is enabled
Variations depending on
temperature, voltage, process
Drawbacks
In addition, they provide hardware support for SMBUS 2.0 and PMBUS 1.1: ARP capability,
Host notify protocol, hardware CRC (PEC) generation/verification, timeouts verifications and
ALERT protocol management. They also have a clock domain independent from the CPU
clock, allowing the I2Cx (x=1,2) to wake up the MCU from Stop mode on address match.
The I2C interfaces can be served by the DMA controller.
Refer to Table 5 for the features available in I2C1 and I2C2.
2
Table 5.
STM32F30xB/C I C implementation
I2C features(1)
I2C1
I2C2
7-bit addressing mode
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10-bit addressing mode
Standard mode (up to 100 kbit/s)
Fast mode (up to 400 kbit/s)
Fast Mode Plus with 20mA output drive I/Os (up to 1 Mbit/s)
Independent clock
SMBus
Wakeup from STOP
1. X = supported.
26/133
Doc ID 023353 Rev 5
STMICROELECTRONICS [ ST ]
