STM32F105xx, STM32F107xx
Electrical characteristics
Table 18. Typical current consumption in Sleep mode, code running from Flash or
RAM
Typ(1)
Symbol Parameter
Conditions
fHCLK
Unit
All peripherals All peripherals
enabled(2)
disabled
72 MHz
48 MHz
36 MHz
24 MHz
16 MHz
8 MHz
28.2
19
6
4.2
14.7
10.1
6.7
3.2
2.3
1.7
1.5
1.3
1.2
13.7
9.3
6.3
2.7
1.6
1
3.4
2.5
2
External clock(3)
1.3
4 MHz
1.2
2 MHz
1.16
1.1
1 MHz
Supply
500 kHz
125 kHz
36 MHz
24 MHz
16 MHz
8 MHz
1.05
1.05
2.6
IDD
current in
mA
Sleep mode
1.8
1.3
Running on high
speed internal RC
0.6
(HSI), AHB prescaler 4 MHz
0.5
used to reduce the
frequency
2 MHz
0.46
0.44
0.43
0.42
1 MHz
0.8
0.6
0.5
500 kHz
125 kHz
1. Typical values are measures at TA = 25 °C, VDD = 3.3 V.
2. Add an additional power consumption of 0.8 mA per ADC for the analog part. In applications, this
consumption occurs only while the ADC is on (ADON bit is set in the ADC_CR2 register).
3. External clock is 8 MHz and PLL is on when fHCLK > 8 MHz.
On-chip peripheral current consumption
The current consumption of the on-chip peripherals is given in Table 19. The MCU is placed
under the following conditions:
●
●
●
all I/O pins are in input mode with a static value at V or V (no load)
DD SS
all peripherals are disabled unless otherwise mentioned
the given value is calculated by measuring the current consumption
–
–
with all peripherals clocked off
with one peripheral clocked on (with only the clock applied)
●
ambient operating temperature and V supply voltage conditions summarized in
DD
Table 6
Doc ID 15274 Rev 6
43/104
STMICROELECTRONICS [ ST ]
