MIC2593
Micrel
Common Status Register (CS)
8-Bits, Read/Write
Common Status Register (CS)
D[7]
D[6]
D[5]
D[4]
D[3]
D[2]
D[1]
D[0]
read-write
Reserved
read-write
Reserved
read-only
GPI_B
read-only
GPI_A
read-write
INTMSK
read-write
UV_INT
read-write
OT_INT
read-only
Reserved
Bit(s)
D[7]
Function
Operation
Reserved
Reserved
Always read as zero
Always read as zero
State of GPIB pin
D[6]
GPI_B
GPI_A
INTMSK
General Purpose Input 0, Slot B
General Purpose Input 0, Slot A
Interrupt Mask
State of GPIA pin
0 = /INT generation is enabled.
1 = /INT generation is disabled. The
MIC2593 does not participate in the SMBus
Alert Response Address (ARA) protocol.
UV_INT
Undervoltage Interrupt
0 = No UVLO fault
1 = UVLO fault
Set whenever a circuit breaker fault condition
occurs as a result of an undervoltage lockout
condition on one of the main supply inputs.
This bit is only set if a UVLO condition occurs
while the ON[A/B] pin is asserted or the
MAIN[A/B] control bits are set.
OT_INT
D[0]
Overtemperature Interrupt
Reserved
0 = Die Temp < 160°C.
1 = Fault: Die Temp > 160°C.
Set if a fault occurs as a result of the
MIC2593’s die temperature exceeding
160°C.
Undefined.
Power-Up Default Value: 00000000 = 00
b
h
Command_Byte Value (R/W): 00000110 = 06
b
h
To reset the OT_INT and UV_INT fault bits, a logical 1 must be written back to these bits.
M9999-042204
20
April 2004