SPECIFICATIONS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
ABSOLUTE MAXIMUM RATINGS
-55OC to 125OC
Storage Temperature
Maximum Process Temperature 200OC for 10 sec.
Frequency Range
Calibration Tolerance1
See Specifications Table below
100 ppm, or tighter, as required
PACKAGING OPTIONS
Operating Temperature Range2 +25OC up to +175OC
• Tray Pack
Frequency-Temperature
Stability3
+_ 125 ppm for +25OC to +150OC
+_ 150 ppm
O
O
for +25 C to +175 C
PACKAGE HANDLING
Total Tolerance4
+_ 200 ppm for +25OC to +175OC
Take proper soldering consideration as the melting
temperature of the lead-attach solder is 217OC
Aging, first year
Shock, survival5
5 ppm at 25OC
1,000 g, 1 ms, 1/2 sine
Vibration, survival5
20 g RMS, 10-2,000 Hz
1. Tighter frequency calibration available. Contact factory.
2. Other temperature ranges available.
3. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the thickness-shear mode.
4. Includes calibration tolerance.
5. Higher shock and vibration available.
SPECIFICATIONS TABLE1 (Specifications shown are typical unless otherwise noted.)
Frequency Motional Resistance
Range R1 @ 25°C
Motional Capacitance Shunt Capacitance
Quality Factor
Q @ 25°C
Load Capacitance
CL Load
C1 @ 25°C
C0 @ 25°C
Drive Level
6 MHz to 30 Ω @ 10 MHz
CX1HT 250 MHz 25 Ω @ 32 MHz
9.6 MHz to 60 Ω @ 10 MHz
5.5 fF @ 10 MHz
6.2 fF @ 32 MHz
2.8 fF @ 10 MHz
6.2 fF @ 32 MHz
2.2 pF @ 10 MHz
2.3 pF @ 32 MHz
1.4 pF @ 10 MHz
2.3 pF @ 32 MHz
100 K @ 10 MHz
30 K @ 32 MHz
95 K @ 10 MHz
30 K @ 32 MHz
20 pF for f < 50 MHz
10 pF for f > 50 MHz
20 pF for f < 50 MHz
10 pF for f > 50 MHz
500 µW MAX. for f < 50 MHz
200 µW MAX. for f > 50 MHz
200 µW MAX. for f < 50 MHz
100 µW MAX. for f > 50 MHz
CX2HT 250 MHz 30 Ω @ 32 MHz
1. For more detailed specifications on high frequency crystals, refer to standard high frequency crystal datasheets (CX1SM, CX2SM)
HOW TO ORDER CX1VHT-06, CX2VHT-06 and CX2VHT-07 CRYSTALS
CX1HT
S
06
20.0M
,
100
/
175
/
/
S
Temp. Range:
S = Customer
Specified Temp.
Range
CX1HT
CX2HT
“S” if special or
custom design.
Blank if Std.
C = Ceramic Lid
Blank = Glass Lid
- 06
- 07
Frequency
Stability over
Temp. Range
(in ppm)
Calibration
Tolerance
@ 250C
Frequency
M = MHz
(in ppm)
OR
/
/
200
/
S
Total
Temp. Range:
S = Customer
Specified Temp.
Range
Frequency
Tolerance
(in ppm)
10202 Rev B
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
STATEK [ STATEK CORPORATION ]
