DNK1201M
Surface Mount Type/
High-output IRED for Automotive
Handling Note
1. Handling of the Products
Mold resin on the backside of the products has adhesiveness. If dust or your hand is stuck to the backside, please slowly
remove the product from there. And if the backside is strongly pushed, it affects the characteristics and reliability. Please
be careful in handling.
2. Dirt
If dirt sticks to the surface of lens, it affects the radiant intensity. Please don't touch the lens with bare hands. If dirt
affects function, please wipe the dirt off carefully not to cause scratches on the lens with lens paper or the like. And if
flux is stuck to the lens, please wipe the flux off carefully with alcohol-based cleaner.
3. Dew
When the temperature changes suddenly at high temperature and humidity, dew is generated. Because dew is likely to
cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. Because color
of lens changes into milky color by rapid cooling at the conditions of high temperature and humidity, please care.
4. Freezing
When temperature is below 0℃, water of dew and the like freezes. Because freezing is likely to cause reduction in
radiant intensity, failure to light up, deterioration of insulation and the like, please care.
5. Strength
When mounting, assembling, cleaning the lens, storing the products and the like, please be careful not to apply
mechanical stress and excessive vibration to products. They are likely to cause cracks, delamination and bending terminal.
And they are likely to affect the characteristics and reliability badly.
6. Mechanical stress to terminals
When storing products and soldering, please be careful not to apply mechanical stress and excessive vibration to
terminals. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the
characteristics and reliability badly.
7. Backside
Dust is stuck to the backside easily on construction of this product. There is no problem on the characteristic even if
dust is stuck to the backside. Please be careful not to wipe off forcibly and not to rub.
8. Moisture Absorption
If you use soldering with the over-specified humidity conditions, it affects the characteristics and reliability. Please use
with the specified conditions.
9. Discoloration
This product might discolor by the heat of reflow and might change to yellowish. But there is no problem on the
characteristic and reliability.
10. Application
Please stop to use by the applications that the breakdown and the wrong operation might influence the life or the human
body.
11. Other
When there is a process of supersonic wave welding etc after mounting the product, there is a possibility of affecting on
the reliability of junction part in package (junction part of die bonding and wire bonding). Please use after affirming
beforehand there is no problem.
If this product is used excluding the content described to these specifications, we do not take any responsibility.
If you use it excluding these ratings, please consult us beforehand.
★Safety of Near-Infrared Rays★
It is generally said that the near-infrared rays(870nm) used for this product is harmless to humans. But we can not say that
direct rays to eyes are always safe as well as the visual light. Please pay attention when the product is used.
Page 10
2009.3.25