2.4 GHz High-Linearity Power Amplifier
SST12LP10
Preliminary Specifications
ELECTRICAL SPECIFICATIONS
The AC and DC specifications for the power amplifier interface signals. Refer to Table 2 for the DC voltage and current spec-
ifications. Refer to Figures 2 through 11 for the RF performance.
Absolute Maximum Stress Ratings
(Applied conditions greater than those listed under “Absolute Maximum
Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation
of the device at these conditions or conditions greater than those defined in the operational sections of this data
sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.)
Input power to pins 2 and 3 (P
IN
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 dBm
Average output power (P
OUT
). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +28 dBm
Supply Voltage at pins 12, 14, 16 (V
CC
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +4.6V
Reference voltage to pins 6 (V
REF1
) and pin 7 (V
REF2
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +3.6V
DC supply current (I
CC
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mA
Operating Temperature (T
A
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +85ºC
Storage Temperature (T
STG
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +120ºC
Maximum Junction Temperature (T
J
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150ºC
Surface Mount Solder Reflow Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . “with-Pb” units
1
: 240°C for 3 seconds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “non-Pb” units: 260°C for 3 seconds
1. Certain “with-Pb” package types are capable of 260°C for 3 seconds; please consult the factory for the latest information.
O
PERATING
R
ANGE
Range
Industrial
Ambient Temp
-40°C to +85°C
V
CC
3.3V
TABLE 2: DC E
LECTRICAL
C
HARACTERISTICS
Symbol
V
CC
I
CC
Supply Current
for 802.11g, 20 dBm
for 802.11g, 23 dBm
for 802.11b, 24 dBm
I
CQ
Idle Current
for both 802.11b/g to meet EVM @ 20.5 dBm
for only 802.11b to meet ACPR @ 22 dBm
I
OFF
V
REG1
V
REG2
Shut down current
Reference Voltage for 1st Stage, without drop resistor
Reference Voltage for 2nd Stage, without drop resistor
70
50
<0.1
2.70
2.70
mA
mA
µA
V
V
T2.0 1280
Parameter
Supply Voltage at pins 12, 14, 16
Min.
3.0
Typ
3.3
160
230
270
Max.
4.2
Unit
V
mA
mA
mA
Test Conditions
©2005 SST Communications Corp.
S71280-00-000
1/05
4