AD6C332
1 Form B
DESCRIPTION
The AD6C332 is a bi-directional, single-pole, single-throw, normally closed multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source depletion type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are protected
with free-wheeling diodes that can handle up to 5A of inrush current, making the relay ideal for switching lamps and highly inductive loads.
FEATURES
APPLICATIONS
Low On-resistance (10 Ohms MAX)
Low input control power consumption (2.5mA TYP)
200mA maximum continuous load current
High input-to-output isolation
Reed relay replacement
•
•
•
•
•
•
•
•
•
•
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
Long life/high reliability
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Storage Temperature
Operating Temperature
Continuous Input Current
Transient Input Current
UNIT
°C
MIN
-55
-40
TYP
MAX
125
85
-S
Surface Mount Leadform Option
•
•
-TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
°C
mA
mA
V
40
SCHEMATIC DIAGRAM
400
Reverse Input Control
Voltage
6
Output Power Dissipation
mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
BABT CERTIFICATE #607836
•
BS EN 60950, BS EN 41003, BS EN 60065
CSA CERTIFICATE #LR111581-1
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C332
rev 1.40 (10/25/2004)
SSOUSA [ SOLID STATE OPTRONIC ]
