AD6C250
1 Form A
DESCRIPTION
The AD6C250 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical and reed relays in special applications that call for very fast switching rates. The relay consists of an integrated circuit
that drives two special source-to-source enhancement type DMOS transistors with extremely low output capacitance and leakage current.
The IC is optically coupled to a light emitting diode which controls its switching. The design of the circuit makes it ideal for switching high
frequency signals.
FEATURES
APPLICATIONS
Fast switching speed (Ton = 50 us TYP)
Low output capacitance (3pF MAX)
Low input control current (5mA MAX)
High input-to-output isolation (2.5kV MIN)
Long life/high reliability
Reed relay replacement
•
•
•
•
•
•
•
•
•
•
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
-S
Surface Mount Option
PARAMETER
Storage Temperature
Operating Temperature
Continuous Input Current
Transient Input Current
UNIT
°C
MIN
-55
-40
TYP
MAX
125
85
•
•
-TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
°C
mA
mA
V
40
SCHEMATIC DIAGRAM
400
Reverse Input Control
Voltage
6
Output Power Dissipation
mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
BABT CERTIFICATE #607836:
CSA CERTIFICATE #LR111581-1
UL FILE #E90096
•
•
•
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C250
rev 1.4 (10/25/04)
SSOUSA [ SOLID STATE OPTRONIC ]
