MBM29DL32XTE/BE80/90
■ ABSOLUTE MAXIMUM RATINGS (See WARNING)
Rating
Parameter
Symbol
Unit
Min
−55
−40
Max
+125
+85
Storage Temperature
Tstg
°C
°C
Ambient Temperature with Power Applied
TA
Voltage with Respect to Ground All pins except
A9, OE, RESET *1, *2
VIN, VOUT
−0.5
VCC + 0.5
V
Power Supply Voltage *1
A9, OE, and RESET *1, *3
WP/ACC *1, *4
VCC
VIN
−0.5
−0.5
−0.5
+4.0
+13.0
+10.5
V
V
V
VACC
*1 : Voltage is defined on the basis of VSS = GND = 0 V.
*2 : Minimum DC voltage on input or I/O pins is −0.5 V. During voltage transitions, input or I/O pins may undershoot
VSS to −2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC + 0.5 V. During voltage
transitions, input or I/O pins may overshoot to VCC + 2.0 V for periods of up to 20 ns.
*3 : Minimum DC input voltage on A9, OE and RESET pins is −0.5 V. During voltage transitions, A9, OE and RESET
pinsmayundershootVSS to−2.0Vforperiodsofupto20ns. Voltagedifferencebetweeninputandsupplyvoltage
(VIN − VCC) does not exceed +9.0 V. Maximum DC input voltage on A9, OE and RESET pins is +13.0 V which
may overshoot to +14.0 V for periods of up to 20 ns.
*4 : Minimum DC input voltage on WP/ACC pin is −0.5 V. During voltage transitions, WP/ACC pin may undershoot
VSS to −2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is +10.5 V which may
overshoot to +12.0 V for periods of up to 20 ns when Vcc is applied.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Value
Parameter
Ambient Temperature
Power Supply Voltage*
Symbol
TA
Conditions
Unit
Min
−40
Max
+85
MBM29DL32XTE/BE80/90
MBM29DL32XTE/BE80
MBM29DL32XTE/BE90
°C
V
+3.0
+2.7
+3.6
+3.6
VCC
V
* : Voltage is defined on the basis of VSS = GND = 0 V.
Note : Operating ranges define those limits between which the functionality of the devices are guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
50