622 Mbps Bi-directional Single Fiber Transceiver
B-15/13-622-TDPM(3)-Sxx-60
Recommended Circuit Schematic
Tx Vcc
Rx Vcc
9
8
7
6 5 4 3 2
1
C6
C5
R1 R3
R9
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R2 R4
R10 R6 R8
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
C2
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=R9=130
R2=R4=R6=R8=R10=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=R9=82
R2=R4=R6=R8=R10=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
L1=L2=1H
L1=L2=1H
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
LUMINENTOIC.COM
LUMNDS578-Jan2108
Rev. A.1
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4