CXA3106Q
Power
SCAN:
This is the control register read setting. When this is ON, the control register serial data is
output from SEROUT (Pin 15). This should normally be set to OFF.
SYNTH:
This is the enable/disable setting for this IC. This should normally be set to ON.
VCO Bypass: This is set to OFF when testing the program counter. This should normally be set to ON.
O/P Enable
These are the enable/disable settings for each TTL output (DIVOUT, UNLOCK, DSYNC, CLK2, NCLK2,
CLK1 and NCLK1). Set to ON when performing evaluation using TTL output.
– 45 –