CXA2089Q/S
2) Control Registers
The CXA2089Q/S control is exercised by writing 2-byte data into the two 8-bit control registers which control
the output selector circuits for the 2 outputs.
S
A
DATA1
A
DATA2
A P
Slave address
S: Start condition
A: Acknowledge
P: Stop condition
Control register structure (DATA1 and DATA2)
• All registers are set to "0" during IC power on.
• " " indicates undefined.
b7
1
b6
0
b5
0
b4
1
b3
0
b2
0
b1
b0
Slave add.
DATA1
ADR
A-IN1
R/W
A-GAIN S/COMP1
S/COMP2
V-IN1
DATA2
AV-IN2
DC OUT
R/W (1): Read/write mode
0: Control data write
1: Status register read
ADR (1): This bit sets the slave address set by the address pin.
0: 90H
1: 92H
A-GAIN (1): LOUT1/ROUT1 output gain selector
0: 0dB output
1: –6dB output
S/COMP1 and S/COMP2 (1 each): S terminal input/composite signal input selectors
By setting S/COMP1 to "0", when composite signal input is selected, YOUT1/COUT1 output the
inputs from YIN1/CIN1.
0: Composite signal inputs (TV, V1 to V4 inputs)
1: S terminal inputs (Y1/C1 to Y3/C3 inputs)
V-IN1 (3 each): This bit selects the input signals output to each video output.
0: Mute
1: Selects the TV input
2: Selects the V1 and Y1/C1 inputs
3: Selects the V2 and Y2/C2 inputs
4: Selects the V3 and Y3/C3 inputs
5: Selects the V4 inputs
6: Mute
7: Mute
– 21 –