SN8P1600
8-bit micro-controller
TC1 CLOCK FREQUENCY OUTPUT (BUZZER)
TC1 timer counter provides a frequency output function. By setting the TC1 clock frequency, the clock signal is output
to P5.3 and the P5.3 general purpose I/O function is auto-disable. The TC1 output signal divides by 2. The TC1 clock
has many combinations and easily to make difference frequency. This function applies as buzzer output to output
multi-frequency.
Figure 8-1. The TC1OUT Pulse Frequency
ꢃ
Example: Setup TC1OUT output from TC1 to TC1OUT (P5.3). The external high-speed clock is 4MHz. The
TC1OUT frequency is 1KHz. Because the TC1OUT signal is divided by 2, set the TC1 clock to 2KHz. The
TC1 clock source is from external oscillator clock. TC1 rate is Fcpu/4. The TC1RATE2~TC1RATE1 = 110.
TC1C = TC1R = 131.
MOV
B0MOV
A,#01100000B
TC1M,A
; Set the TC1 rate to Fcpu/4
MOV
B0MOV
B0MOV
A,#131
TC1C,A
TC1R,A
; Set the auto-reload reference value
B0BSET
B0BSET
B0BSET
FTC1OUT
FALOAD1
FTC1ENB
; Enable TC1 output to P5.3 and disable P5.3 I/O function
; Enable TC1 auto-reload function
; Enable TC1 timer
SONiX TECHNOLOGY CO., LTD
Page 62
Revision 1.94
SONIX [ SONIX TECHNOLOGY COMPANY ]
