SN8F2250B Series
USB 2.0 Full-Speed 8-Bit Micro-Controller
8.7 PWM1 MODE
8.7.1 OVERVIEW
PWM function is generated by TC1 timer counter and output the PWM signal to PWM1OUT pin (P5.3). The 8-bit
counter counts modulus 256, 64, 32, 16 controlled by ALOAD0, TC1OUT bits. The value of the 8-bit counter (TC1C) is
compared to the contents of the reference register (TC1R). When the reference register value (TC1R) is equal to the
counter value (TC1C), the PWM output goes low. When the counter reaches zero, the PWM output is forced high. The
low-to-high ratio (duty) of the PWM1 output is TC1R/256, 64, 32, 16.
PWM output can be held at low level by continuously loading the reference register with 00H. Under PWM operating, to
change the PWM’s duty cycle is to modify the TC1R.
Note: TC1 is double buffer design. Modifying TC1R to change PWM duty by program, there is no glitch
and error duty signal in PWM output waveform. Users can change TC1R any time, and the new reload
value is loaded to TC1R buffer at TC1 overflow.
MAX. PWM
ALOAD0 TC1OUT PWM duty range TC1C valid value TC1R valid bits value
Frequency
(Fcpu = 6MHz)
11.719K
Remark
0
0
1
1
0
1
0
1
0/256~255/256
0/64~63/64
0/32~31/32
0/16~15/16
0x00~0xFF
0x00~0x3F
0x00~0x1F
0x00~0x0F
0x00~0xFF
0x00~0x3F
0x00~0x1F
0x00~0x0F
Overflow per 256 count
Overflow per 64 count
Overflow per 32 count
Overflow per 16 count
46.875K
93.75K
187.5K
The Output duty of PWM is with different TC1R. Duty range is from 0/256~255/256.
0
1
128
254 255
0
1
128
254 255
……
……
……
……
TC1 Clock
TC1R=00H
TC1R=01H
TC1R=80H
TC1R=FFH
Low
High
Low
High
Low
High
Low
SONiX TECHNOLOGY CO., LTD
Page 98
Version 1.1
SONIX [ SONIX TECHNOLOGY COMPANY ]
