SN8F2280 Series
USB 2.0 Full-Speed 8-Bit Micro-Controller
1 = External clock from P0.1/INT1 pin.
Bit 2
Bit 1
Bit 0
ALOAD1: Auto-reload control bit. Only valid when PWM1OUT = 0.
0 = Disable TC1 auto-reload function.
1 = Enable TC1 auto-reload function.
TC1OUT: TC1 time out toggle signal output control bit. Only valid when PWM1OUT = 0.
0 = Disable, P5.4 is I/O function.
1 = Enable, P5.4 is output TC0OUT signal.
PWM1OUT: PWM output control bit.
0 = Disable PWM output.
1 = Enable PWM output. PWM duty controlled by TC1OUT, ALOAD1 bits.
Note: When TC1CKS=1, TC0 became an external event counter and TC1RATE is useless. No more P0.1
interrupt request will be raised. (P0.1IRQ will be always 0).
08EH
TC2M
Read/Write
After reset
Bit 7
TC2ENB
R/W
Bit 6
TC2rate2
R/W
Bit 5
TC2rate1
R/W
Bit 4
TC2rate0
R/W
Bit 3
TC2CKS
R/W
Bit 2
ALOAD2
R/W
Bit 1
Bit 0
TC2OUT PWM2OUT
R/W
0
R/W
0
0
0
0
0
0
0
Bit 7
TC2ENB: TC2 counter control bit.
0 = Disable TC2 timer.
1 = Enable TC2 timer.
Bit [6:4] TC2RATE[2:0]: TC2 internal clock select bits.
000 = fcpu/256.
001 = fcpu/128.
…
110 = fcpu/4.
111 = fcpu/2.
Bit 3
Bit 2
Bit 1
Bit 0
TC2CKS: TC2 clock source select bit.
0 = Internal clock (Fcpu or Fosc).
1 = External clock from P0.2 pin.
ALOAD2: Auto-reload control bit. Only valid when PWM2OUT = 0.
0 = Disable TC2 auto-reload function.
1 = Enable TC2 auto-reload function.
TC2OUT: TC2 time out toggle signal output control bit. Only valid when PWM2OUT = 0.
0 = Disable, P5.5 is I/O function.
1 = Enable, P5.5 is output TC2OUT signal.
PWM2OUT: PWM output control bit.
0 = Disable PWM output.
1 = Enable PWM output. PWM duty controlled by TC2OUT, ALOAD2 bits.
SONiX TECHNOLOGY CO., LTD
Page 95
Version 1.1