Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
13.1.4.7
Port x 1588 Sequence ID, Source UUID High-WORD Transmit Capture Register
(1588_SEQ_ID_SRC_UUID_HI_TX_CAPTURE_x)
Offset:
Port 1: 118h
Port 2: 138h
Port 0: 158h
Size:
32 bits
BITS
DESCRIPTION
TYPE
DEFAULT
31:16
Sequence ID (SEQ_ID)
This field contains the Sequence ID from the 1588 Sync or Delay_Req
packet.
RO
0000h
15:0
Source UUID High (SRC_UUID_HI)
This field contains the high 16-bits of the Source UUID from the 1588 Sync
or Delay_Req packet.
RO
0000h
Note: The selection between Sync or Delay_Req packets is based on the corresponding
master/slave bit in the 1588 Configuration Register (1588_CONFIG).
Note: There are multiple instantiations of this register, one for each port of the LAN9313/LAN9313i.
Refer to Section 13.1.4 for additional information.
Note: For Port 0(External MII), receive is defined as data from the switch fabric, while transmit is to
the switch fabric.
Revision 1.2 (04-08-08)
170
SMSC LAN9313/LAN9313i
DATASHEET
SMSC [ SMSC CORPORATION ]
