Highly Efficient Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
5.5.4
PHY Identifier 2
Index (In Decimal):
3
Size:
16-bits
BITS
15-10
9 - 4
3 - 0
DESCRIPTION
TYPE
RO
DEFAULT
PHY ID Number b. Assigned to the 19th through 24th bits of the OUI.
Model Number. Six-bit manufacturer’s model number.
0xC0C3h
RO
Revision Number. Four-bit manufacturer’s revision number.
RO
5.5.5
Auto-negotiation Advertisement
Index (In Decimal):
4
Size:
16-bits
BITS
DESCRIPTION
TYPE
DEFAULT
15
Next Page. 1 = next page capable, 0 = no next page ability. This device
does not support next page ability.
RO
0
14
13
Reserved
RO
R/W
R/W
R/W
0
0
Remote Fault. 1 = remote fault detected, 0 = no remote fault
12
Reserved
0
11-10
Pause Operation.
00
00 No PAUSE
01 Symmetric PAUSE
10 Asymmetric PAUSE
11 Both Symmetric PAUSE and Asymmetric PAUSE
9
8
100Base-T4. 1 = T4 able, 0 = no T4 ability This device does not support
RO
0
100Base-T4.
100Base-TX Full Duplex. 1 = TX with full duplex, 0 = no TX full duplex
ability
R/W
See
Note 5.3
7
6
100Base-TX. 1 = TX able, 0 = no TX ability
R/W
R/W
1
10Base-T Full Duplex.
1 = 10Mbps with full duplex
0 = no 10Mbps with full duplex ability
See
Note 5.3
5
10Base-T. 1 = 10Mbps able, 0 = no 10Mbps ability
R/W
R/W
See
Note 5.3
4:0
Selector Field. [00001] = IEEE 802.3
00001
Note 5.3 This default value of this bit is determined by Pin 74 "SPEED_SEL". Please refer to the
pin description section for more details.
SMSC LAN9215
111
Revision 1.5 (07-18-06)
DATASHEET