Highly Efficient Single-Chip 10/100 Non-PCI Ethernet Controller
Datasheet
BITS
DESCRIPTION
TYPE
DEFAULT
8
100Base-TX Full Duplex. 1 = TX with full duplex, 0 = no TX full duplex
R/W
See
ability
Note 5.2
7
6
100Base-TX. 1 = TX able, 0 = no TX ability
R/W
R/W
1
10Base-T Full Duplex.
See
1 = 10Mbps with full duplex
0 = no 10Mbps with full duplex ability
Note 5.2
5
10Base-T. 1 = 10Mbps able, 0 = no 10Mbps ability
R/W
R/W
See
Note 5.2
4:0
Selector Field. [00001] = IEEE 802.3
00001
Note 5.2 This default value of this bit is determined by Pin 74 "SPEED_SEL". Please refer to the
pin description section for more details.
5.5.6
Auto-negotiation Link Partner Ability
Index (In Decimal):
5
Size:
16-bits
BITS
DESCRIPTION
TYPE
DEFAULT
15
Next Page. 1 = next page capable, 0 = no next page ability. This device
RO
0
does not support next page ability.
14
Acknowledge. 1 = link code word received from partner 0 = link code word
RO
0
not yet received
Note:
This bit will always read 0
13
12
Remote Fault. 1 = remote fault detected, 0 = no remote fault
RO
RO
RO
0
0
Reserved
11-10
Pause Operation.
00
00 No PAUSE supported by partner station
01 Symmetric PAUSE supported by partner station
10 Asymmetric PAUSE supported by partner station
11 Both Symmetric PAUSE and Asymmetric PAUSE supported by partner
station
9
8
100Base-T4. 1 = T4 able, 0 = no T4 ability
RO
RO
0
0
100Base-TX Full Duplex. 1 = TX with full duplex, 0 = no TX full duplex
ability
7
6
100Base-TX. 1 = TX able, 0 = no TX ability
RO
RO
0
0
10Base-T Full Duplex.
1 = 10Mbps with full duplex
0 = no 10Mbps with full duplex ability
5
10Base-T. 1 = 10Mbps able, 0 = no 10Mbps ability
Selector Field. [00001] = IEEE 802.3
RO
RO
0
4:0
00001
SMSC LAN9116
105
Revision 1.1 (05-17-05)
DATASHEET