欢迎访问ic37.com |
会员登录 免费注册
发布采购

LAN88710BM 参数 Datasheet PDF下载

LAN88710BM图片预览
型号: LAN88710BM
PDF下载: 下载PDF文件 查看货源
内容描述: [Ethernet Transceiver, 1-Trnsvr, 5 X 5 MM, 0.90 MM HEIGHT, ROHS COMPLIANT, QFN-32]
分类和应用: 以太网:16GBASE-T电信电信集成电路
文件页数/大小: 80 页 / 1353 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号LAN88710BM的Datasheet PDF文件第10页浏览型号LAN88710BM的Datasheet PDF文件第11页浏览型号LAN88710BM的Datasheet PDF文件第12页浏览型号LAN88710BM的Datasheet PDF文件第13页浏览型号LAN88710BM的Datasheet PDF文件第15页浏览型号LAN88710BM的Datasheet PDF文件第16页浏览型号LAN88710BM的Datasheet PDF文件第17页浏览型号LAN88710BM的Datasheet PDF文件第18页  
Small Footprint MII/RMII 10/100 Ethernet Transceiver for Automotive Applications  
Datasheet  
Table 2.2 LED Pins  
BUFFER  
NUM PINS  
NAME  
SYMBOL  
TYPE  
DESCRIPTION  
LED 1  
LED1  
O12  
Link activity LED indication. This pin is driven  
active when a valid link is detected and blinks  
when activity is detected.  
Note:  
Refer to Section 3.8.1, "LEDs," on  
page 41 for additional LED information.  
Regulator Off  
Configuration  
Strap  
REGOFF  
IS  
(PD)  
This configuration strap is used to disable the  
internal 1.2 V regulator. When the regulator is  
disabled, external 1.2 V must be supplied to  
VDDCR.  
„ When REGOFF is pulled high to VDD2A with  
an external resistor, the internal regulator is  
disabled.  
1
„ When REGOFF is floating or pulled low, the  
internal regulator is enabled (default).  
See Note 2.2 for more information on  
configuration straps.  
Note:  
Refer to Section 3.7.4, "REGOFF:  
Internal +1.2 V Regulator  
Configuration," on page 39 for additional  
details.  
LED 2  
LED2  
O12  
Link speed LED indication. This pin is driven  
active when the operating speed is 100 Mbps. It  
is inactive when the operating speed is 10 Mbps  
or during line isolation.  
Note:  
Refer to Section 3.8.1, "LEDs," on  
page 41 for additional LED information.  
nINT/TXER/  
TXD4  
nINTSEL  
IS  
(PU)  
This configuration strap selects the mode of the  
nINT/TXER/TXD4 pin.  
Function  
Select  
Configuration  
Strap  
„ When nINTSEL is floated or pulled to VDD2A,  
nINT is selected for operation on the  
nINT/TXER/TXD4 pin (default).  
1
„ When nINTSEL is pulled low to VSS,  
TXER/TXD4 is selected for operation on the  
nINT/TXER/TXD4 pin.  
See Note 2.2 for more information on  
configuration straps.  
Note:  
Refer to See Section 3.8.1.2, "nINTSEL  
and LED2 Polarity Selection," on  
page 42 for additional information.  
Note 2.2 Configuration strap values are latched on power-on reset and system reset. Configuration  
straps are identified by an underlined symbol name. Signals that function as configuration  
straps must be augmented with an external resistor when connected to a load. Refer to  
Section 3.7, "Configuration Straps," on page 37 for additional information.  
Revision 1.1 (05-26-10)  
14  
SMSC LAN88710AM/LAN88710BM  
DATASHEET