Small Footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR® Technology
Datasheet
Note: Current measurements do not include power applied to the magnetics or the optional external
LEDs. The Ethernet component current is typically 41mA in 100BASE-TX mode and 100mA in
10BASE-T mode, independent of the 2.5V or 3.3V supply rail of the transformer.
Note 5.6 Calculated with full flexPWR features activated: VDDIO=1.8V & internal regulator disabled.
5.4
DC Specifications
Table 5.2 details the non-variable I/O buffer characteristics. These buffer types do not support variable
voltage operation. Table 5.3 details the variable voltage I/O buffer characteristics. Typical values are
provided for 1.8V, 2.5V, and 3.3V VDDIO cases.
Table 5.2 Non-Variable I/O Buffer Characteristics
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
NOTES
IS Type Input Buffer
Low Input Level
VILI
VIHI
-0.3
V
V
High Input Level
3.6
1.39
1.79
459
Negative-Going Threshold
Positive-Going Threshold
Schmitt Trigger Hysteresis
VILT
VIHT
VHYS
1.01
1.39
336
1.19
1.59
399
V
Schmitt trigger
Schmitt trigger
V
mV
(VIHT - VILT
)
Input Leakage
IIH
-10
10
2
uA
pF
Note 5.7
(VIN = VSS or VDDIO)
Input Capacitance
O12 Type Buffers
CIN
Low Output Level
High Output Level
VOL
VOH
0.4
V
V
IOL = 12mA
VDD2A - 0.4
IOH = -12mA
Note 5.8
ICLK Type Buffer
(XTAL1 Input)
Low Input Level
High Input Level
VILI
VIHI
-0.3
1.4
0.35
V
V
VDD2A + 0.4
Note 5.7 This specification applies to all inputs and tri-stated bi-directional pins. Internal pull-down
and pull-up resistors add +/- 50uA per-pin (typical).
Note 5.8 XTAL1/CLKIN can optionally be driven from a 25MHz single-ended clock oscillator.
Revision 1.4 (08-23-12)
68
SMSC LAN8710A/LAN8710Ai
DATASHEET