欢迎访问ic37.com |
会员登录 免费注册
发布采购

FDC37M607 参数 Datasheet PDF下载

FDC37M607图片预览
型号: FDC37M607
PDF下载: 下载PDF文件 查看货源
内容描述: 增强的超级I / O控制器,红外支持 [ENHANCED SUPER I/O CONTROLLER WITH INFRARED SUPPORT]
分类和应用: 控制器
文件页数/大小: 182 页 / 634 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号FDC37M607的Datasheet PDF文件第33页浏览型号FDC37M607的Datasheet PDF文件第34页浏览型号FDC37M607的Datasheet PDF文件第35页浏览型号FDC37M607的Datasheet PDF文件第36页浏览型号FDC37M607的Datasheet PDF文件第38页浏览型号FDC37M607的Datasheet PDF文件第39页浏览型号FDC37M607的Datasheet PDF文件第40页浏览型号FDC37M607的Datasheet PDF文件第41页  
Table 19 - Description of Command Symbols  
NAME DESCRIPTION  
SYMBOL  
EOT  
End of Track  
The final sector number of the current track.  
GAP  
GPL  
Alters Gap 2 length when using Perpendicular Mode.  
Gap Length  
The Gap 3 size. (Gap 3 is the space between sectors excluding  
the VCO synchronization field).  
H/HDS  
HLT  
Head Address  
Selected head: 0 or 1 (disk side 0 or 1) as encoded in the sector  
ID field.  
Head Load Time The time interval that FDC waits after loading the head and before  
initializing a read or write operation. Refer to the Specify  
command for actual delays.  
HUT  
Head Unload  
Time  
The time interval from the end of the execution phase (of a read or  
write command) until the head is unloaded. Refer to the Specify  
command for actual delays.  
LOCK  
Lock defines whether EFIFO, FIFOTHR,  
and PRETRK  
parameters of the CONFIGURE COMMAND can be reset to their  
default values by a "software Reset". (A reset caused by writing to  
the appropriate bits of either tha DSR or DOR).  
MFM  
MT  
MFM/FM Mode  
Selector  
A one selects the double density (MFM) mode. A zero selects  
single density (FM) mode.  
Multi-Track  
Selector  
When set, this flag selects the multi-track operating mode. In this  
mode, the FDC treats a complete cylinder under head 0 and 1 as  
a single track. The FDC operates as this expanded track started  
at the first sector under head 0 and ended at the last sector under  
head 1. With this flag set, a multitrack read or write operation will  
automatically continue to the first sector under head 1 when the  
FDC finishes operating on the last sector under head 0.  
N
Sector Size Code This specifies the number of bytes in a sector. If this parameter is  
"00", then the sector size is 128 bytes. The number of bytes  
transferred is determined by the DTL parameter. Otherwise the  
sector size is (2 raised to the "N'th" power) times 128. All values  
up to "07" hex are allowable. "07"h would equal a sector size of  
16k. It is the user's responsibility to not select combinations that  
are not possible with the drive.  
N
00  
01  
02  
03  
SECTOR SIZE  
128 bytes  
256 bytes  
512 bytes  
1024 bytes  
37  
 复制成功!