Table 16 - Status Register 1
NAME
End of
BIT NO.
SYMBOL
EN
DESCRIPTION
7
The FDC tried to access a sector beyond the final
sector of the track (255D). Will be set if TC is not
issued after Read or Write Data command.
Cylinder
6
5
Unused. This bit is always "0".
DE
OR
Data Error
The FDC detected a CRC error in either the ID field or
the data field of a sector.
4
Overrun/
Underrun
Becomes set if the FDC does not receive CPU or DMA
service within the required time interval, resulting in
data overrun or underrun.
3
2
Unused. This bit is always "0".
ND
No Data
Any one of the following:
1. Read Data, Read Deleted Data command - the
FDC did not find the specified sector.
2. Read ID command - the FDC cannot read the ID
field without an error.
3. Read A Track command - the FDC cannot find the
proper sector sequence.
1
0
NW
MA
Not Writable WP pin became a "1" while the FDC is executing a
Write Data, Write Deleted Data, or Format A Track
command.
Missing
Any one of the following:
Address Mark 1. The FDC did not detect an ID address mark at the
specified track after encountering the index pulse
from the IDX pin twice.
2. The FDC cannot detect a data address mark or a
deleted data address mark on the specified track.
30
SMSC [ SMSC CORPORATION ]
