Dual RPM-Based PWM Fan Controller with Hardware Thermal Shutdown
Datasheet
The pin type are described in detail below. All pins labelled with (5V) are 5V tolerant.
All pin labelled with (2V) should not be exposed to any voltage level greater than 2V.
Table 2.2 Pin Types
PIN TYPE
DESCRIPTION
Power
This pin is used to supply power or ground to the device.
Digital Input - this pin is used as a digital input. This pin is
5V tolerant.
DI
AI
Analog Input - this pin is used as an input for analog
signals.
Analog Output - this pin is used as an output for analog
signals.
AO
AIO
DO
Analog Input / Output - this pin is used as an I/O for analog
signals.
Push / Pull Digital Output - this pin is used as a digital
output. It can both source and sink current.
Digital Input / Open Drain Output this pin is used as an
digital I/O. When it is used as an output, It is open drain
and requires a pull-up resistor. This pin is 5V tolerant.
DIOD
OD
Open Drain Digital Output - this pin is used as a digital
output. It is open drain and requires a pull-up resistor. This
pin is 5V tolerant.
SMSC EMC2104
Revision 1.74 (05-08-08)
DATA1S3HEET