1°C Temperature Sensor with Hardware Thermal Shutdown
Datasheet
Chapter 6 Register Description
The registers shown in Table 6.1 are accessible through the SMBus. An entry of ‘-’ indicates that the
bit is not used and will always read ‘0’.
Table 6.1 Register Set in Hexadecimal Order
DEFAULT
REGISTER
ADDRESS
R/W
REGISTER NAME
FUNCTION
VALUE
PAGE
00h
01h
02h
03h
R
Internal Diode Data
High Byte
Stores the integer data for the
Internal Diode
00h
Page 26
R
R
External Diode Data
High Byte
Stores the integer data for the
External Diode
00h
00h
00h
Status
Stores the status bits for the
Internal Diode and External Diodes
Page 26
Page 27
R/W
Configuration
Controls the general operation of
the device (mirrored at address
09h)
04h
05h
06h
07h
08h
09h
0Ah
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Conversion Rate
Controls the conversion rate for
updating temperature data
(mirrored at address 0Ah)
06h
(4/sec)
Page 28
Page 28
Internal Diode High
Limit
Stores the 8-bit high limit for the
Internal Diode (mirrored at address
0Bh)
55h
(85°C)
Internal Diode Low
Limit
Stores the 8-bit low limit for the
Internal Diode (mirrored at address
0Ch)
00h
(0°C)
External Diode High
Limit High Byte
Stores the integer portion of the
high limit for the External Diode
(mirrored at register 0Dh)
55h
(85°C)
External Diode Low
Limit High Byte
Stores the integer portion of the
low limit for the External Diode
(mirrored at register 0Eh)
00h
(0°C)
Configuration
Controls the general operation of
the device (mirrored at address
03h)
00h
Page 27
Page 28
Conversion Rate
Controls the conversion rate for
updating temperature data
(mirrored at address 04h)
06h
(4/sec)
Revision 1.24 (02-05-08)
SMSC EMC1422
DATA2S4HEET