Multiple Channel 1°C Temperature Sensors with Beta Compensation
Datasheet
Table 10.1 Customer Revision History (continued)
REVISION LEVEL & DATE
SECTION/FIGURE/ENTRY
CORRECTION
Rev. 1.35 (05-06-09)
Pin Table
Identified 5V tolerant pins. Added the following
application note below table: “For the 5V tolerant
pins that have a pull-up resistor (SMCLK,
SMDATA, THERM, ALERT), the voltage difference
between VDD and the pull-up voltage must never
exceed 3.6V.”
Table 4.1, "Absolute
Maximum Ratings"
Updated voltage limits for 5V tolerant pins with
pull-up resistors.
Added the following note below table: “For the 5V
tolerant pins that have a pull-up resistor (SMCLK,
SMDATA, THERM, ALERT), the pull-up voltage
must not exceed 3.6V when the device is
unpowered.”
Table 4.2, "Electrical
Specifications"
Added leakage current
Ordering Information and
Table 2.1, “Part Selection”
Added EMC1414-3 and EMC1413-3
Updated figures for package
Table 9.2, "10-Pin DFN
Package Drawing"
Rev. 1.34 (12-02-08)
Initial document creation
Revision 1.41 (02-23-12)
SMSC EMC1413 / EMC1414
DATA5S2HEET
SMSC [ SMSC CORPORATION ]
