Multiple Channel 1°C Temperature Sensors with Beta Compensation
Datasheet
Chapter 4 Electrical Specifications
4.1
Absolute Maximum Ratings
Table 4.1 Absolute Maximum Ratings
DESCRIPTION
RATING
UNIT
Supply Voltage (VDD
)
-0.3 to 4.0
-0.3 to 5.5
V
V
Voltage on 5V tolerant pins (V5VT_pin
)
Voltage on 5V tolerant pins (|V5VT_pin - VDD|) (see Note 4.1)
Voltage on any other pin to Ground
Operating Temperature Range
0 to 3.6
V
-0.3 to VDD +0.3
-40 to +125
V
°C
°C
Storage Temperature Range
-55 to +150
Lead Temperature Range
Refer to JEDEC Spec. J-STD-020
Package Thermal Characteristics for MSOP-10
Thermal Resistance (θj-a
)
132.2
°C/W
Package Thermal Characteristics for DFN-10
Thermal Resistance (θj-a
)
77.1
°C/W
V
ESD Rating, All pins HBM
2000
Note: Stresses at or above those listed could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those indicated
in the operation sections of this specification is not implied.
Note 4.1 For the 5V tolerant pins that have a pull-up resistor (SMCLK, SMDATA, THERM, and
ALERT), the pull-up voltage must not exceed 3.6V when the device is unpowered.
Revision 1.41 (02-23-12)
SMSC EMC1413 / EMC1414
DATA1S0HEET
SMSC [ SMSC CORPORATION ]
