1°C Temperature Sensor with Beta Compensation
Datasheet
Common Dimensions
Max Note Remark
1.75
Symbol
Min
1.35
Nom
A
-
-
-
-
OVERALL PKG HEIGHT
STANDOFF
A1
A2
D
E
E1
L
b
c
e
0.10
1.25
8.53
5.79
3.81
0.41
0.31
0.18
0.25
1.65
8.74
6.20
4.01
0.89
0.51
0.25
-
3
-
3
-
2,4
4
-
BODY THICKNESS
"X" BODY SIZE
8.64
5.99
3.91
0.64
-
LEAD SPAN
"Y" BODY SIZE
LEAD FOOT LENGTH
LEAD WIDTH
LEAD FOOT THICKNESS
LEAD PITCH
1.27 BSC
NOTES:
1. ALL DIMENSION ARE IN mm.
2. TRUE POSITION SPREAD TOLERANCE OF EACH LEAD IS ±0.125mm AT
MAXIMUM MATERIAL CONDITION. DIMENSION "b" DOES NOT INCLUDE
DAMBAR PROTUSION. DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT
3. DIMENSION "D" DOES NOT INCLUDE MODE FLASH, PROTRUSIONS, OR
GATE BURRS. MAXIMUM MOLD FLASH, PROTRUSIONS, OR GATE BURRS
IS 0.152MM PER END. DIMENSION "E1" DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. MAXIMUM INTERLEAD FLASH OR PROTRUSION
IS 0.254MM PE
4. "b" & "c" APPLY TOTEH FLAT SECTION OF THE LEAD BETWEEN
0.102mm AND 0.254mm FROM THE LEAD TIP.
5. THE CHAMFER FEATURE IS OPTIONAL. IF IT IS NOT PRESENT, THEN A
PIN1 IDENTIFIER MUST BE LOCATED WITHIN THE INDEX AREA INDICATED.
Figure 8.6 Package Dimensions for SOIC-14
Package Markings
8.1
8.1.1
EMC1404-X-AIZL (10-pin MSOP)
All devices will be marked on the first line of the top side with “1404”. On the second line, they will be
marked with the appropriate -X number (-1, -2, etc), the Functional Revision “B” and Country Code
(CC).
8.1.2
EMC1403-X-AIZL (10-pin MSOP)
All devices will be marked on the first line of the top side with “1403”. On the second line, packages
will be marked with the appropriate -X number (-1, -2, etc), the Functional Revision “B” and Country
Code (CC).
SMSC EMC1403/EMC1404
Revision 2.0 (08-10-12)
DATA5S1HEET
SMSC [ SMSC CORPORATION ]
