欢迎访问ic37.com |
会员登录 免费注册
发布采购

CAP1066 参数 Datasheet PDF下载

CAP1066图片预览
型号: CAP1066
PDF下载: 下载PDF文件 查看货源
内容描述: 6通道电容式触摸传感器,具有6个LED驱动器 [6 Channel Capacitive Touch Sensor with 6 LED Drivers]
分类和应用: 驱动器传感器
文件页数/大小: 71 页 / 960 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号CAP1066的Datasheet PDF文件第63页浏览型号CAP1066的Datasheet PDF文件第64页浏览型号CAP1066的Datasheet PDF文件第65页浏览型号CAP1066的Datasheet PDF文件第66页浏览型号CAP1066的Datasheet PDF文件第67页浏览型号CAP1066的Datasheet PDF文件第68页浏览型号CAP1066的Datasheet PDF文件第70页浏览型号CAP1066的Datasheet PDF文件第71页  
6 Channel Capacitive Touch Sensor with 6 LED Drivers  
Datasheet  
Chapter 7 Revision History  
Table 7.1 Customer Revision History  
SECTION/FIGURE/ENTRY  
REVISION LEVEL & DATE  
CORRECTION  
Rev. 1.1 (08-05-09)  
Features  
“TBD” replaced with “3uA” under Low Power  
Operation  
General Description  
Chapter 1, Pin Description  
Deep sleep drawing “5uA” of current changed to  
“3uA”  
Application Note added: “The SPI_CS# pin should  
be grounded when SMBus, I2C, or BC-Link  
communications are used.”  
Pin description table updated: Added to pin  
function description for RESET pin: “This pin  
contains an internal 50uA pull-down current.”  
Table 2.2, "Electrical  
Specifications"  
Table updated:  
- Current Measurement, ISTBY - changed the  
typical column to 160, max to 210. Changed the  
conditions to read: " Standby state active, one  
sensor monitored, no LED active, default  
conditions (8 avg, 70ms cycle time)"  
- Current Measurement, IDSLEEP -changed the  
TYP column value to 3 and max to 10.  
- Base Capacitance Line - changed the name to  
"Maximum Base Capacitance". Removed the value  
in the MIN column and MAX column. Added 50 in  
the TYP column.  
Section 3.1.1, "SMBus (I2C)  
Communications"  
The following text deleted: “The SPI_CS# pin is not  
used and any data presented to this pin will be  
ignored.”  
and replaced with an application note: “For  
SMBus/I2C communications, the SPI_CS# pin is  
not used and should be grounded; any data  
presented to this pin will be ignored.”  
Section 3.1.3, "BC-Link  
Communications"  
The following application note added: “For BC-Link  
communications, the SPI_CS# pin is not used and  
should be grounded; any data presented to this pin  
will be ignored.”  
Table 3.1, "ADDR_COMM  
Pin Decode"  
Modified table heading, “Pull-Down Resistor” by  
adding “(+/- 5%)”  
Section 5.28, "LED Pulse 1  
Period Register",  
Added note describing limitation on operation  
Section Table 5.45, "LED  
Pulse / Breathe Period  
Example" and  
Section 5.30, "LED Breathe  
Period Register"  
Table 5.51, "LED Duty Cycle  
Decode"  
Updated table for Min and Max columns  
SMSC CAP1066  
Revision 1.1 (08-05-09)  
DATA6S9HEET