欢迎访问ic37.com |
会员登录 免费注册
发布采购

CAP1014-1-EZK-TR 参数 Datasheet PDF下载

CAP1014-1-EZK-TR图片预览
型号: CAP1014-1-EZK-TR
PDF下载: 下载PDF文件 查看货源
内容描述: 多通道电容式触摸传感器和LED驱动器 [Multiple Channel Capacitive Touch Sensor and LED Driver]
分类和应用: 驱动器传感器
文件页数/大小: 84 页 / 1205 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第64页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第65页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第66页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第67页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第69页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第70页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第71页浏览型号CAP1014-1-EZK-TR的Datasheet PDF文件第72页  
Multiple Channel Capacitive Touch Sensor and LED Driver  
Datasheet  
5.40.1  
5.40.2  
5.40.3  
LED Behavior 1 - 81h  
Bits 7 - 6 - LED4_CTL[1:0] - Determines the behavior of LED4 / GPIO4 when configured to operate  
as an LED output  
Bits 5 - 4 - LED3_CTL[1:0] - Determines the behavior of LED3 / GPIO3 when configured to operate  
as an LED output  
Bits 3 - 2 - LED2_CTL[1:0] - Determines the behavior of LED2 / GPIO2 when configured to operate  
as an LED output  
Bits 1 - 0 - LED1_CTL[1:0] - Determines the behavior of LED1 / GPIO1 when configured to operate  
as an LED output  
LED Behavior 2 - 82h  
Bits 7 - 6 - LED8_CTL[1:0] - Determines the behavior of LED8 / GPIO8 when configured to operate  
as an LED output  
Bits 5 - 4 - LED7_CTL[1:0] - Determines the behavior of LED7 / GPIO7 when configured to operate  
as an LED output  
Bits 3 - 2 - LED6_CTL[1:0] - Determines the behavior of LED6 / GPIO6 when configured to operate  
as an LED output  
Bits 1 - 0 - LED5_CTL[1:0] - Determines the behavior of LED5 / GPIO5 when configured to operate  
as an LED output  
LED Behavior 3 - 83h  
Bits 7 - 6 - LED11_ALT[1:0] - Determines the behavior of LED 11 when the PWR_LED bit is set and  
either the SLEEP or DSLEEP bits are set (see Section 5.1).  
Bits 5 - 4 - LED11_CTL[1:0] - Determines the behavior of LED11 when the PWR_LED bit is set and  
both the SLEEP and DSLEEP bits are not set (see Section 5.1).  
Bits 3 - 2 - LED10_CTL[1:0] - Determines the behavior of LED10.  
Bits 1 - 0 - LED9_CTL[1:0] - Determines the behavior of LED9.  
APPLICATION NOTE: When driving the LED / GPIOx output as a GPO, the LEDx_CTL[1:0] bits should be set to  
00b.  
Table 5.59 LEDx_CTL Bit Decode  
LEDX_CTL  
OPERATION  
- LINKED  
[1:0]  
OPERATION -  
NOT LINKED  
WITH SENSOR  
WITH  
SENSOR  
START  
TRIGGER  
STOP  
TRIGGER  
1
0
DESCRIPTION  
The LED is driven to the programmed  
state (active or inactive).  
Press  
Detected  
Release  
Detected  
0
0
Direct  
Direct  
The LED will breathe 5 times starting  
based on the Start Trigger). The total  
period of each “breath” is determined  
by the LED Pulse 1 Period controls -  
see Section 5.41  
Pulse Press  
(Pulse 1)  
Press  
Detected  
0
1
Direct  
n/a  
Revision 1.65 (08-11-09)  
SMSC CAP1014  
DATA6S8HEET