SL393
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
V
VCC
Power Supply Voltages
Single Supply
Split Supplies
36
±18
V
Input Differential Voltage Range
Input Common Mode Voltage Range (1)
Output Short Circuit to Ground
Input Current, per pin (2)
36
-0.3 to VCC
Continuous
50
V
V
IDR
V
ICR
ISC
IIN
TJ
mA
Junction Temperature
Plastic Packages
150
-65 to +150
260
°C
°C
°C
Tstg
TL
Storage Temperature
Lead Temperature, 1mm from Case for 10 Seconds
PD
Power Dissipation @TA=25°C
Plastic Package
570
5.7
mW
mW/°C
Derate above 25°C
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
Notes:
1. Split Power Supplies.
2. V <-0.3V. This input current will only exist when voltage at any of the input leads is driven negative.
IN
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Min
Max
Unit
V
DC Supply Voltage
±2.5 or
±15 or
5.0
30
TA
Operating Temperature, All Package Types
0
+70
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, V and VOUT should be constrained to the range
IN
GND£(V or VOUT)£VCC.
IN
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs
must be left open.
System Logic
SLS
Semiconductor
SLS [ SYSTEM LOGIC SEMICONDUCTOR ]
