GENERAL SPECIFICATIONS
Hold-up time
Efficiency
120 Vac, 60 Hz
30 ms at 600 Watts output
>84 %
120 Vac 600 W output
isolation voltage
input to ouput
input to ground
4000 Vac
1500 Vac
Switching frequency
Safety Approvals
Maximum weight
fixed
70 KHz, +/- 10 KHz
UL/EN/IEC 60601-1 CSA22.2 No.60601-1
2 kg (4.4 lbs)
MODEL NUMBER Output
Peak Output
Ripple
Regulation
GPMP600-24
GPMP600-28
GPMP600-36
GPMP700-48
24 V 25 A
24 V 27 A
28 V 23.5 A
36 V 19 A
48 V 15.6 A
240 mV
240 mV
240 mV
240 mV
1%
1%
1%
1%
28 V 21.5 A
36 V 17 A
48 V 14 A
NOTES
1. Integral forced air cooling
2. Peak rating is for 1 minute maximum 10% duty cycle
3. Noise measurent 20 MHz Bandwidth, differential mode. Measured with scope probe directly across output terminals of the power supply.
MECHANICAL NOTES
The GPMP series is factory configured for stand alone installation with multiple configurations of output connectors. Apart from the DIN 41612 option
there are three Phoenix contact connector options shown in the drawing on page 3.
The GPHP (commercial series) can be configured with Condor CRA series racks. Other mounting configurations and connector options are available,
Please contact factory.
POWER CONNECTOR DIN # 41612 Type H
INPUT PINS
Z-32
AC Line
D-30
AC Neutral
Z-28, D26
GROUND
OUTPUT PINS
Z12, D14, Z16,D18
OUTPUT
Z4, D6, Z8, D10
RETURN (COMMON)
STATUS & CONTROL PINS
Z20
DC POWER GOOD
INHIBIT
Z24
D22
AC POWER FAIL
Page 2 of 3
SLPOWER [ SL Power Electronics ]
