Commercial
Model
Medical
Model
Output No.
Output
Output
Minimum
Output
Maximum
Output
Peak
Noise P-P
Total
Regulation
Notes
GPC40A
GPC40B
GPC40D
GPM40A
GPM40B
GPM40D
1
2
3
1
2
3
1
2
3
1
1
1
1
1
1
1
+5.1 V
+12 V
-12 V
+5.1 V
+15 V
-15 V
+5.1 V
+24 V
-12 V
3.3 V
5 V
0.4 A
0 A
0 A
0.4 A
0 A
0 A
0.4 A
0.A
0.A
0
4 A
2 A
5 A
3 A
50 mV
120 mV
120 mV
50 mV
2%
5%
3%
2%
5%
3%
2%
5%
3%
2%
2%
2%
2%
2%
2%
2%
B,C
C
0.4 A
4 A
0.7 A
5 A
2 A
3 A
150 mV
150 mV
50 mV
B,C
C
0.4 A
4 A
0.7 A
5 A
1 A
1.5 A
0.7 A
10 A
10 A
6 A
240 mV
120 mV
35 mV
B,C
C
0.4 A
8 A
GPC40-3.3
GPC40-5
GPM40-3.3
GPM40-5
0
8 A
50 mV
GPC40-9
GPM40-9
9 V
0 A
0 A
0 A
0 A
0 A
4.5 A
3.3 A
2.7 A
1.7 A
1.4 A
90mV
GPC40-12
GPC40-15
GPC40-24
GPC40-28
GPM40-12
GPM40-15
GPM40-24
GPM40-28
12 V
4.2 A
3.3 A
2.1 A
1.8 A
120 mV
150 mV
240 mV
280 mV
15 V
24 V
28 V
Note: For 48 volt model, GPC40-48 or GPM40-48, contact factory for availability.
A. Total regulation is defined as the maximum deviation from the nominal voltage for all steady-state conditions of initial voltage setting, input line voltage and output load.
B. To maintain these regulation conditions, the 5.1V current must be at least 1/4 of V2 and not greater than 5 times the V2 current.
C. Requires +5.1V to be adjusted within 1% with at least a 0.4A load to maintain regulation on this output.
D. Add “G”suffix to model number for RoHS compliant model.
GPC40/GPM40 MECHANICAL SPECIFICATIONS
3
3
A. Units should be allowed to warm up/operate under non-condensing
ENVIRONMENTAL SPECIFICA-
OPERATING
NON-OPERATING
onditions before application of power.
B. Shock testing—half-sinusoidal, 10 3 ms duration, direction,
3 orthogonal axes, total 6 shocks.
C. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to
2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and
1 hr./axis non-operating.
TIONS
Temperature (A)
Humidity (A)
Shock (B)
See individual specs. -40 to +85°C
0 to 95% RH
0 to 95% RH
40 gpk
20 gpk
Altitude
-500 to 10,000 ft
1.5 g rms’0.003 g2/Hz
-500 to 40,000 ft
5 g rms’0.026 g2/Hz
Vibration (C)
SL Power Electronics Corp, 6050 King Drive, Bldg. A, Ventura, CA 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 www.slpower.com. Rev. 1/07.
Data Sheet © 2007 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, Condor accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
SLPOWER [ SL Power Electronics ]
