Commercial Medical
RoHS
Suffix*
Output
No.
Output
Minimum
Output
Output
Output
Peak
Model
Model
Output
Maximum (A) Maximum (B)
V1 OVP Set
6.2 0.6 V
Noise P-P
Regulation
GLC75A
GLM75A
G
G
G
G
G
G
G
G
G
1
2
3
4
+5.1 V
+12 V
-12 V
1 A
0.5 A
0 A
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
50 mV
120 mV
120 mV
120 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+12 V
0 A
2.5 A
2ꢀ
GLC75B
GLC75C
GLC75D
GLC75E
GLC75F
GLC75H
GLC75J
GLC75P
GLM75B
GLM75C
GLM75D
GLM75E
GLM75F
GLM75H
GLM75J
GLM75P
1
2
3
4
+5.1 V
+12 V
-5 V
1 A
0.5 A
0 A
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
6.2 0.6 V
50 mV
120 mV
50 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+12 V
0 A
2.5 A
120 mV
2ꢀ
1
2
3
4
+5.1 V
+12 V
-15 V
1 A
0.5 A
0 A
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
50 mV
120 mV
150 mV
150 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+15 V
0 A
2.5 A
2ꢀ
1
2
3
4
+5.1 V
+24 V
-12 V
1 A
0.5 A
0 A
8 A
2.5 A
1 A
10 A
2.5 A
1 A
12 A
3.5 A
1.2 A
4 A
50 mV
240 mv
120 mV
120 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+12 V
0 A
2.5 A
3 A
2ꢀ
1
2
3
4
+5.1 V
+24 V
-15 V
1 A
0.5 A
0 A
8 A
2.5 A
1 A
10 A
2.5 A
1 A
12 A
3.5 A
1.2 A
4 A
50 mV
240 mV
150 mV
150 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+15 V
0 A
2.5 A
3 A
2ꢀ
1
2
3
4
+5.1 V
+15 V
-5 V
1 A
0.5 A
0
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
50 mV
150 mV
50 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
-15 V
0
2.5 A
150 mV
2ꢀ
1
2
3
4
+5.1 V
+15 V
-15 V
1A
0.5 A
0
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
50 mV
150 mV
150 mV
150 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+15 V
0
2.5 A
2ꢀ
1
2
3
+5.1 V
+12 V
-12 V
5 V
1 A
0.5 A
0
8 A
2.5 A
1 A
10 A
3 A
1 A
3 A
12 A
4 A
1.2 A
4 A
50 mV
120 mV
120 mV
50 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
4(C)
0
2.0 A
2ꢀ
1
2
3
4
+5.1 V
+24 V
-12 V
1 A
0.5 A
0 A
8 A
4 A
1 A
10 A
4 A
1 A
3 A
12 A
4.5 A
1.2 A
4 A
50 mV
240 mv
120 mV
120 mV
2ꢀ
+10ꢀ,-5ꢀ (D)
3ꢀ
+12 V
0 A
2.5 A
2ꢀ
* Add “G”suffix to part number for RoHS compliant model. Contact factory for availability.
A. Rating with unrestricted convection cooling. Total power not to exceed 75 W.
B. Rating with 26 cfm forced-air cooling. Total power not to exceed 110 W.
C. Floating fourth output can be referenced as either positive or negative. Connect pin 12 to Return to provide a positive voltage at Pin 13. Connect pin 13 to Return to
provide a negative voltage at Pin 12.
D. To maintain these regulations conditions, the +5V current must be at least 1/5 of V2 and not greater than 5 times the V2 current. Requires +5V to be adjusted to within
1ꢀ with at least a 1 A load to maintain regulation on this output.
GLC75/GLM75 - MULTIPLE OUTPUT - MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS OPERATING
NON-OPERATING
-40 to +85°C
0 to 95ꢀ RH
40 gpk
A. Units should be allowed to warm up/operate under non-condensing
conditions before application of power. Derate output current and total
output power by 2.5ꢀ per °C above 50°C.
Temperature (A)
Humidity (A)
Shock (B)
0 to 50°
0 to 95ꢀ RH
20 gpk
B. Shock testing—half-sinusoidal, 10 3 ms duration, direction, 3
orthogonal axes, total 6 shocks.
Altitude
-500 to 10,000 ft
1.5 g rms’0.003 g2/Hz 5 g rms’0.026 g2/Hz
-500 to 40,000 ft
C. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to
2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and 1
hr./axis non-operating.
Vibration (C)
SL Power Electronics, Inc., 6050 King Drive, Bldg. A, Ventura, CA 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 www.slpower.com Rev. 9-23-10.
Data Sheet © 2010 SL Power Electronics, Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
SLPOWER [ SL Power Electronics ]
