CompactPCI® SYSTEM POWER SUPPLIES
CPCI SERIES 150 to 350 WATTS, AC INPUT WITH PFC, QUAD OUTPUT, HOT SWAP
SPECIFICATIONS
EMI: CONDUCTED RFI
AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz.
POWER FACTOR: 0.99 typical at full load. Meets EN61000-3-2.
INRUSH:
Meets FCC Part 15, Subpart J, class B;
EN55022 class A; CISPR 22 class B.
All 150 W and 200 W models class A
CPCI-154, 204 MODELS: Cold start ac current is less than 15 A at
115 Vac, and 30 A at 230 Vac. Limited by thermistor.
CPCI-354 MODELS: Cold start ac current is less than 30 A at
115 Vac, and 60 A at 230 Vac. Limited by thermistor.
BROWNOUT PROTECTION: Holds regulation to 85 Vac
(30 seconds maximum)
FAIL# SIGNAL: TTL compatible signal. Signal goes low
under the following conditions:
CPCI-154 & CPCI-204 Models (all connector types):
Outputs #1 or #2 fail; an overcurrent condition on outputs
#1, #2, or #3; an overtemperature shutdown; an overvoltage
shutdown; or an ac input failure (5ms warning before outputs
shutdown).
HOLDUP TIME: 16 ms minimum after removal of power at full load.
10 ms minimum for CPCI 200s.
CPCI-354 & CPCI-354T Models:
Any of 4 outputs fail; an overtemperature shutdown; an
overvoltage shutdown; or an ac input failure (5ms warning
before outputs shut down).
EFFICIENCY: 70% typical.
AC INPUT
Min. Load Maximum Output
Model
Power
150 W
150 W
200 W
200 W
350 W
350 W
Output 1
Output 2
Output 3
Output 4
on V1*
2.5 A
2.5 A
3.0 A
2.5 A
5.0 A
5.0 A
From V1 & V2
25 A
CPCI-154-1203
CPCI-154-1203M
CPCI-204-1203
CPCI-204-1203M
CPCI-354-1203
CPCI-354T-1203
5.0 V @ 25A
5.0 V @ 25 A
5.0 V @ 25 A
5.0 V @ 25 A
5.0 V @ 50 A
5.0 V @ 50 A
3.3 V @ 20 A
3.3 V @ 20 A
3.3V @ 30 A
3.3 V @ 25 A
3.3 V @ 40 A
3.3 V @ 40 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 12 A
12 V @ 12 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 4 A
-12 V @ 4 A
25 A
35 A
35 A
65 A
65 A
* For full output current capability on V2, V3, V4.
DPCI SERIES 150 to 350 WATTS, QUAD OUTPUT, 48 VDC INPUT, HOT SWAP
SPECIFICATIONS
DC INPUT: 36-72 Vdc
EFFICIENCY: 75% typical
FAIL# SIGNAL: TTL compatible signal. Signal goes low under
the following conditions: Any of 4 outputs fail; an overtemperature
shutdown; or an overvoltage shutdown.
48 VDC INPUT
Min. Load Maximum Output
Model
Power
150 W
150 W
200 W
200 W
350 W
350 W
Output 1
5 V @ 25 A
5 V @ 25 A
5 V @ 25 A
5 V @ 25 A
5 V @ 50 A
5 V @ 50 A
Output 2
Output 3
Output 4
on V1*
2.5 A
2.5 A
3.0 A
2.5 A
5.0 A
5.0 A
From V1 & V2
25 A
DPCI-154-1203
DPCI-154-1203M
DPCI-204-1203
DPCI-204-1203M
DPCI-354-1203
DPCI-354T-1203
3.3 V @ 20 A
3.3 V @ 20 A
3.3 V @ 30 A
3.3 V @ 25 A
3.3 V @ 40 A
3.3 V @ 40 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 5.5 A
12 V @ 12 A
12 V @ 12 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 0.5 A
-12 V @ 4 A
-12 V @ 4 A
25 A
35 A
35 A
65 A
65 A
* For full output current capability on V2, V3, V4.
Condor D.C. Power Supplies, Inc. • 2311 Statham Parkway, Oxnard, CA 93033
800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com
SLPOWER [ SL Power Electronics ]
