CINT1200
200W Single Output
Industrial Series
EMI/EMC Compliance
EN55011/22 Class B, FCC Part 15, Subpart B, Class B
Conducted Emissions
EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
EN61000-4-8, 3A/m
EN61000-4-11, 100%, 10ms; 30%, 275ms; 60%, 100ms; Performance
Criteria A, A, & A at 70% load.
EN61000-3-2, Class A, B, C, & D
EN61000-3-3, Complies (dmax<6%)
Mechanical Drawing
[4] x 0.156
4 PLCS
MTG
Notes: 1. All dimensions in inches (mm), tolerance
is +/-0.000”.
HOLES
2. Mounting holes should be grounded for
EMI purposes.
3. FG is safety ground connection.
4. The power supply requires mounting on
metal standoffs 0.20” (5mm) in height, min.
Connector Information
Input Connector
J100
Ground
(FG)
DC Output Connector
J300
PIN 1) AC LINE
PIN 2) EMPTY
PIN 3) AC NEUTRAL
Term. 1,2,3: RTN
Term. 4,5,6: +Vout
0.25” FASTON TAB
Mating Connector:
AMP Molex 640250-3
Pins: 640252-2
Mating Connector:
AMP 640250-6
Pins: 640252-2
Mating Connector:
Molex 190020001
Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for
consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
www.slpower.com
CINT1200 REV 1.4 12-JUNE-13
3