欢迎访问ic37.com |
会员登录 免费注册
发布采购

CINT1175 参数 Datasheet PDF下载

CINT1175图片预览
型号: CINT1175
PDF下载: 下载PDF文件 查看货源
内容描述: 专为工业和ITE应用的高密度175Watts交流到直流电源。 [A highly dense 175Watts AC to DC power supply designed for industrial and ITE applications.]
分类和应用:
文件页数/大小: 8 页 / 649 K
品牌: SLPOWER [ SL Power Electronics ]
 浏览型号CINT1175的Datasheet PDF文件第1页浏览型号CINT1175的Datasheet PDF文件第3页浏览型号CINT1175的Datasheet PDF文件第4页浏览型号CINT1175的Datasheet PDF文件第5页浏览型号CINT1175的Datasheet PDF文件第6页浏览型号CINT1175的Datasheet PDF文件第7页浏览型号CINT1175的Datasheet PDF文件第8页  
General Specifications (continued)  
F1, F2: 4A, 250Vac fuses provided on all  
models  
Hiccup Mode  
Input Fuses  
Overload Protection  
Earth Leakage  
Current  
Short Circuit  
Protection  
Provided - no damage will occur if the output  
is shorted.  
<750μA@264Vac, 60Hz, NC  
OVP firing reduces output voltage to <50%  
of nominal in <50ms. See chart for trip  
range.  
Overvoltage  
Protection  
90% typical at 115Vac  
Efficiency  
175W continuous, with 200 lfm airflow, 120W  
convection cooled – See chart for specific  
voltage model ratings.  
PFC: Fixed, 65kHz  
Main Converter: Variable 35-200kHz, 65-  
70kHz at full load.  
Output Power  
Switching Frequency  
Isolation  
Input-Output: 4000Vac  
Input-Ground: 1800Vac  
Output-Ground: 1500Vac  
Transient  
Response  
50% load step. i/t: <0.2A/μS  
Max Volt Deviation = 3%  
Operating  
Temperature  
-10°C to +70°C  
Start Up at -40°C, full load  
See chart  
Ripple and Noise  
Output Voltage  
Temperature  
Derating  
Derate output power linearly above 50°C to  
50% at 70°C  
See chart  
Voltage  
Adjustability  
+/-5% from nominal  
Not required  
-40°C to +85°C  
Storage Temperature  
Altitude  
Operating: -500 to 10,000 ft.  
Non-operating: -500 to 40,000 ft.  
Minimum Load  
+/- 3%. See chart  
5% to 95%, non-condensing  
Total Regulation  
Relative Humidity  
Operating: 0.003g/Hz, 1.5grms overall, 3  
axes, 10 min/axis  
Non-Operating: 0.026g2/Hz, 5.0grms overall,  
3 axes, 1 hr/axis  
Operating: Half-sine, 20gpk, 10ms, 3 axes, 6  
shocks total  
Non-Operating: Half-sine, 40 gpk, 10 ms, 3  
axes, 6 shocks total  
Vibration  
Shock  
W: 2.0” x L: 4.0” x H: 1.3”  
210g  
EN/CSA/UL/IEC 60950-1, 2nd Edition  
Dimensions  
Weight  
Safety Standards  
MTBF  
331,105 hours, 175W load, 110Vac input,  
25°C ambient  
Auxiliary Signals  
During normal operations, stays HIGH. Signal  
goes LOW with 5mS warning before loss of  
DC output from AC failure.  
Open collector logic signal goes and stays HIGH  
100mS to 500mS after main output reaches  
regulation.  
AC Power Fail:  
DC OK:  
Connect to inhibit pin to output common to  
inhibit the DC output.  
Inhibit:  
www.slpower.com  
CINT1175 REV 5.4, 17-DEC-12  
2