Rated
100W
Medical Family
SNP-Z10x-M Series
Output Specifications:
MODEL
NO.
OUTPUT
RAIL
LOAD
VOLTAGE
RIPPLE
NOISE
LINE
REG.
LOAD
REG.
ACCURACY
MIN. RATED MAX.
PEAK
SNP-Z106-Mꢀꢀ
SNP-Z107-Mꢀꢀ
SNP-Z108-Mꢀꢀ
SNP-Z109-Mꢀꢀ
SNP-Z10T-Mꢀꢀ
+5Vꢀ
+12Vꢀ
+15Vꢀ
+24Vꢀ
+48Vꢀ
ꢀ0Aꢀ ꢀ20Aꢀ 26Aꢀꢀꢀꢀ
ꢀ
+4.95V~+5.05Vꢀꢀ
+11.88V~+12.12Vꢀ
+14.85V~+15.15Vꢀ
+23.76V~+24.24Vꢀ
+47.52V~+48.48Vꢀ
50mVppꢀ
100mVppꢀ
100mVppꢀ
100mVppꢀ
150mVppꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±1%
±1%ꢀ
ꢀ±1%ꢀ
±1%
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ0Aꢀ
ꢀ0Aꢀ
ꢀ9Aꢀ
11Aꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀ
ꢀ7Aꢀ 8.7Aꢀꢀ
ꢀ0Aꢀ ꢀ4.5Aꢀ 5.4Aꢀ
0Aꢀ 2.1Aꢀ 2.7Aꢀ
±1%
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
+5Vꢀ
+12Vꢀ
-12Vꢀ
ꢀ0.5Aꢀ 10Aꢀ 15Aꢀꢀꢀꢀ
ꢀ0.05Aꢀ ꢀ3Aꢀ 4.1Aꢀ
ꢀ0Aꢀ ꢀ0.8Aꢀ 1.1Aꢀ
ꢀ
ꢀ
ꢀ
+4.95V~+5.05Vꢀꢀ
+11.40V~+12.60Vꢀ
-11.40V~-12.60Vꢀ
50mVppꢀ
120mVppꢀ
120mVppꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±1%
±5%
±5%ꢀ
SNP-Z101-Mꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
+5Vꢀ
+15Vꢀ
-15Vꢀ
ꢀ0.5Aꢀ ꢀ10Aꢀ 15Aꢀꢀꢀꢀ
ꢀ0.05Aꢀ ꢀ2.5Aꢀ 4.1Aꢀ
ꢀ0Aꢀ ꢀ0.8Aꢀ 1.1Aꢀ
ꢀ
ꢀ
ꢀ
+4.95V~+5.05Vꢀꢀ
+14.25V~+15.75Vꢀ
-14.25V~-15.75Vꢀ
50mVppꢀ
150mVppꢀ
150mVppꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±1%
±5%
±5%
SNP-Z104-Mꢀꢀ
ꢀ
ꢀ
ꢀ
SNP-Z10H-Mꢀ
+28Vꢀ
0Aꢀ
3.8Aꢀ 4.65Aꢀ
ꢀ
+27.72ꢀ~+28.28Vꢀ
100mVppꢀ
±0.5%ꢀ
±1%
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
+5Vꢀ
+24Vꢀ
+12Vꢀ
0.5Aꢀ 2.5Aꢀ
0.05Aꢀ 2.8Aꢀ
4Aꢀ
4Aꢀ
1Aꢀ
ꢀ
ꢀ
ꢀ
+4.95V~+5.05Vꢀ
+22.8V~+25.2Vꢀ
+11.4V~+12.6Vꢀ
50mVppꢀ
240mVppꢀ
120mVppꢀ
±0.5%ꢀ
±0.5%ꢀ
±0.5%ꢀ
±1%
±5%
±5%
SNP-Z10K-Mꢀ
ꢀ
ꢀ
0Aꢀ
0.7Aꢀ
Note:
1.ꢀ Theꢀtotalꢀoutputꢀcurrentꢀisꢀratedꢀloadꢀwithꢀfreeꢀairꢀconvectionꢀandꢀmax.ꢀloadꢀwithꢀ18CFMꢀofꢀforcedꢀairꢀflowꢀoverꢀtheꢀunit.
2.ꢀ Atꢀfactory,ꢀꢀinꢀ60%ꢀratedꢀloadꢀcondition,ꢀeachꢀoutputꢀisꢀcheckedꢀtoꢀbeꢀwithinꢀvoltageꢀaccuracy.
3.ꢀ Lineꢀregulationꢀisꢀdefinedꢀbyꢀchangingꢀ±10%ꢀofꢀinputꢀvoltageꢀfromꢀnominalꢀlineꢀatꢀratedꢀload.
4.ꢀ Loadꢀregulationꢀisꢀdefinedꢀbyꢀchangingꢀ±40%ꢀofꢀmeasuredꢀoutputꢀloadꢀfromꢀ60%ꢀratedꢀloadꢀatꢀanotherꢀoutputꢀsetꢀtoꢀ60%ꢀratedꢀload.
5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor and a 47u electrolytic
capacitor at rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load
and nominal line.
7.ꢀ Efficiencyꢀisꢀmeasuredꢀatꢀratedꢀloadꢀandꢀnominalꢀline.
8. Model Selection:
SNP-Z10x-M is for medical application.
-Jim-
** This data sheet is only for models selection. For business, engineering specification by model must be used.
4-2
NOV. 2016
SKYNET [ Skynet Electronic Copyright ]
