欢迎访问ic37.com |
会员登录 免费注册
发布采购

ST7567 参数 Datasheet PDF下载

ST7567图片预览
型号: ST7567
PDF下载: 下载PDF文件 查看货源
内容描述: 65 X 132点阵LCD控制器/驱动器 [65 x 132 Dot Matrix LCD Controller/Driver]
分类和应用: 驱动器控制器
文件页数/大小: 49 页 / 677 K
品牌: SITRONIX [ SITRONIX TECHNOLOGY CO., LTD. ]
 浏览型号ST7567的Datasheet PDF文件第2页浏览型号ST7567的Datasheet PDF文件第3页浏览型号ST7567的Datasheet PDF文件第4页浏览型号ST7567的Datasheet PDF文件第5页浏览型号ST7567的Datasheet PDF文件第6页浏览型号ST7567的Datasheet PDF文件第7页浏览型号ST7567的Datasheet PDF文件第8页浏览型号ST7567的Datasheet PDF文件第9页  
Sitronix
1. INTRODUCTION
ST7567
65 x 132 Dot Matrix LCD Controller/Driver
ST7567 is a single-chip dot matrix LCD driver which incorporates LCD controller and common/segment drivers. ST7567
can be connected directly to a microprocessor with 8-bit parallel interface or 4-line serial interface (SPI-4). Display data sent
from MPU is stored in the internal Display Data RAM (DDRAM) of 65x132 bits. The display data bits which are stored in
DDRAM are directly related to the pixels of LCD panel. ST7567 contains 132 segment-outputs, 64 common-outputs and 1
icon-common-output. With built-in oscillation circuit and low power consumption power circuit, ST7567 generates LCD
driving signal without external clock or power, so that it is possible to make a display system with the fewest components
and minimal power consumption.
2. FEATURES
Single-chip LCD Controller & Driver
On-chip Display Data RAM (DDRAM)
Capacity: 65x132=8580 bits
Directly display RAM pattern from DDRAM
Selectable Display Duty (by SEL2 & SEL1)
1/65 duty : 65 common x 132 segment
1/55 duty : 55 common x 132 segment
1/49 duty : 49 common x 132 segment
1/33 duty : 33 common x 132 segment
Microprocessor Interface
Bidirectional 8-bit parallel interface supports:
8080-series and 6800-series MPU
Serial interface (SPI-4) is also supported (write only)
Abundant Functions
Display ON/OFF, Normal/Reverse Display Mode, Set
Display Start Line, Read IC Status, Set all Display
Points ON, Set LCD Bias, Electronic Volume Control,
Read-modify-Write, Select Segment Driver Direction,
Power Saving Mode, Select Common Driver Direction,
Select Voltage Regulator Resistor Ratio (for V0).
External Hardware Reset Pin (RSTB)
Built-in Oscillation Circuit
No external component required
Low Power Consumption Analog Circuit
Voltage Booster (4X, 5X)
High-accuracy Voltage Regulator for LCD Vop:
(Thermal Gradient: -0.05%/°
C)
Voltage Follower for LCD Bias Voltage
Wide Operation Voltage Range
VDD1-VSS1=1.8V~3.3V
VDD2-VSS2=2.4V~3.3V
VDD3-VSS3=2.4V~3.3V
Temperature Range: -30~85°
C
Package Type: COG
ST7567
6800 , 8080 , 4-Line
Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice.
Ver 1.4b
1/49
2009/02/04