Preliminary
STK14EC8
Document Revision History
Rev
1.0
Date
Change
Moved to Preliminary from Advance Information
April 2007
- made clear that nominal supply is 3.3V, not 3.0V (range 2.7V to 3.6V)
- modified language on pin description of HSB and NC.
- changed ISB from 1mA to 2mA.
- changed Icc3 from 8mA to 13mA
- clarified description language of Figure 3
- clarifed description language of Software Recall
- clarified description language of Preventing Autostore
- corrected typo on Industrial temp range: -45 to -40
SIMTEK STK14EC8 Datasheet, April 2007
Copyright 2007, Simtek Corporation. All rights reserved.
This datasheet may only be printed for the expressed use of Simtek Customers. No part of the datasheet may be reproduced in any other
form or means without the express written permission from Simtek Corporation. The information contained in this publication is believed to be
accurate, but changes may be made without notice. Simtek does not assume responsibility for, or grant or imply any warranty, including MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE regarding this information, the product or its use, Simtek products are not war-
ranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express
written agreement with Simtek. Furthermore, Simtek does not authorize its products for use as critical components in life-support systems
where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Simtek products in life-
support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Simtek against all
charges. Nothing herein constitutes a license, grant or transfer of any rights to any Simtek patent, copyright, trademark, or other proprietary
right.
Rev 1.0
Document Control #ML0060
April, 2007
18
Simtek Confidential