SiI3114 PCI to Serial ATA Controller
Data Sheet
Silicon Image, Inc.
Table 43. VS_RSV_IND
VS_RSV_IND
On VS Set General Protocol command, set General Protocol Code.
On VS Set Command Protocol command, update the corresponding
Command Protocol Table entry.
Commands other than vendor specific or reserved commands shall be
executed according to the predefined protocol.
All vendor specific/reserved commands with entries in the Command
Protocol Table shall be executed according to the Protocol Code in the
corresponding Command Protocol entry.
All reserved commands shall be executed according to the General
Protocol Code.
All other commands shall result in an ABORT status.
1
2
3
Received VS Unlock Vendor Specific command
Received VS Lock command
Otherwise
VS_VS_RSV_IND
VS_LOCKED
→
→
→
VS_RSV_IND
Table 44. VS_VS_RSV_IND
VS_VS_RSV_IND
On VS Set General Protocol command, set General Protocol Code.
On VS Set Command Protocol command, update the corresponding
Command Protocol Table entry.
Commands other than vendor specific or reserved commands shall be
executed according to the predefined protocol.
All vendor specific/reserved commands with entries in the Command
Protocol Table shall be executed according to the Protocol Code in the
corresponding Command Protocol entry.
All other vendor specific/reserved commands shall be executed
according to the General Protocol Code.
1
2
Received VS Lock command
Otherwise
VS_LOCKED
→
→
VS_VS_RSV_IND
© 2007 Silicon Image, Inc.
111
SiI-DS-0103-D