Silan
Semiconductors
SC8560
TABLE 2: SETTING CONTENTS
Displa y Mode
Se t lnput
Func tions
lmmediately adds 1 to hour digits and then assigns an additional 1. at a speed
of 2 Hz , after each 1/4 to 3/4 second .
HOUR
lmmediately adds 1 to minute digits and then assigns an additional 1. at a
speed of 2 Hz, after each 1/4 to 3/4 second .
Time
MIN
Seconds are reset.
BOTH
HOUR(Note)
MIN
Operates both as outline above.
Second digits are cleared to [00].
Second
Time holds.
(Alarm&Sleep)
Resets hour and minute digits as [0:00] when operating in 24-Hmode or [12:00]
when operating in 12-H mode.
BOTH
HOUR
MIN
lmmediately adds 1to hour digits and then assigns an additional 1, at a speed
of 2 Hz, after each 1/4to 3/4 second.
lmmediately adds 1 to minute digits and then assigns an additional 1, at a
speed of 2 Hz, after each 1/4to 3/4 second.
Alarm
Resets hour and minute digits to [0:00] when operating in 24-hour mode or
[12:00] when operating in, 12-hour mode.
BOTH
-
Sets sleep counter to [0:59] instantly when VDD is activated to sleep select.
Sets sleep counter to [1:59] instantly when VDD is activated to sleep select and
hour at the same time.
HOUR
Sleep
MIN
Sleep counter looses 1 at a speed of 2 Hz
BOTH
Sleep counter looses 1 at a speed of 2 Hz
Once conditions have been switched to reset or hold, input of other functions is locked until HOUR and MIN
input have separated.
Note:
When the digital reading for seconds is between 30 and 59 seconds, 1 is added to digits for minutes as the
digital reading for seconds resets to [00]
HANGZHOU SILAN MICROELECTRONICS CO.,LTD.
Rev: 1.1
2003.06.26
6
SILAN [ SILAN MICROELECTRONICS JOINT-STOCK ]
