Si1000/1/2/3/4/5
SFR Definition 21.15. P1MDIN: Port1 Input Mode
Bit
7
6
5
4
3
2
1
0
Name
Type
Reset
P1MDIN[7:0]
R/W
1
1
1
1
1
1
1
1
SFR Page = 0x0; SFR Address = 0xF2
Bit Name
Function
7:0 P1MDIN[7:0] Analog Configuration Bits for P1.7–P1.0 (respectively).
Port pins configured for analog mode have their weak pullup and digital receiver
disabled. The digital driver is not explicitly disabled.
0: Corresponding P1.n pin is configured for analog mode.
1: Corresponding P1.n pin is not configured for analog mode.
Note: P1.0, P1.1, P1.2, and P1.4 are internally connected to the EZRadioPRO peripheral. P1.3 is not externally or
internally connected.
SFR Definition 21.16. P1MDOUT: Port1 Output Mode
Bit
7
6
5
4
3
2
1
0
Name
Type
Reset
P1MDOUT[7:0]
R/W
0
0
0
0
0
0
0
0
SFR Page = 0x0; SFR Address = 0xA5
Bit Name
Function
7:0 P1MDOUT[7:0] Output Configuration Bits for P1.7–P1.0 (respectively).
These bits control the digital driver even when the corresponding bit in register
P1MDIN is logic 0.
0: Corresponding P1.n Output is open-drain.
1: Corresponding P1.n Output is push-pull.
Note: P1.0, P1.1, P1.2, and P1.4 are internally connected to the EZRadioPRO peripheral. P1.3 is not externally or
internally connected.
224
Rev. 1.0
SILICON [ SILICON ]
