EFR32MG13 Mighty Gecko Multi-Protocol Wireless SoC Family Data Sheet
Revision History
9. Revision History
Revision 1.4
May 2019
• Added PLFRCO block and associated specifications.
• Added Revision D and removed Revision C OPNs in Table 2.1 Ordering Information on page 3.
• Renamed 3.8.1 General Purpose Cyclic Redundancy Check (GPCRC) section.
• Added PLFRCO current consumption value in Table 4.5 Current Consumption 3.3 V without DC-DC Converter on page 29, Table
4.6 Current Consumption 3.3 V using DC-DC Converter on page 31 and Table 4.7 Current Consumption 1.8 V without DC-DC Con-
verter on page 33.
• Added 4.1.12.4 Precision Low-Frequency RC Oscillator (PLFRCO) section.
• Updated Figure 4.6 Typical EM2 with PLFRCO Current Consumption vs Rate of Temperature Change on page 116 with the new
PLFRCO current consumption values.
• Added footnotes in Table 4.45 General-Purpose I/O (GPIO) on page 89.
• Changed the test condition in Table 4.49 Digital to Analog Converter (VDAC) on page 97.
• Added Figure 4.6 Typical EM2 with PLFRCO Current Consumption vs Rate of Temperature Change on page 116.
• Edited the description of the Decouple pin and RESETn pin in Table 6.1 QFN48 2.4 GHz and Sub-GHz Device Pinout on page 127,
Table 6.2 QFN48 2.4 GHz Device Pinout on page 129 and Table 6.3 QFN32 2.4 GHz Device Pinout on page 131.
• In 7.3 QFN48 Package Marking, updated feature code.
• In 8.3 RQFN32 Package Marking, updated feature code.
• Corrected minor typos throughout the document.
Revision 1.3
November 2018
• Updated the current consumed in receive mode under 802.15.4 receiving frame test condition at 2.4 GHz frequency with and without
radio pre-scaling - Table 4.8 Current Consumption Using Radio 3.3 V with DC-DC on page 35.
• “PAVDD” references in Sub-GHz specification tables clarified to refer to “External PA Supply”. The PAVDD pin is for the 2.4 GHz
radio.
• Table 6.4 GPIO Functionality Table on page 133 re-sorted to list pins alphabetically by GPIO Name column.
• Pin PD9 removed from 6.6 Analog Port (APORT) Client Maps – PD9 is not available on this device family.
• Updated Bluetooth LE 1 MBps sensitivity plot with new data in 4.2.3 2.4 GHz Radio.
• Changed “Bluetooth Low Energy” to “Bluetooth LE” in 2. Ordering Information.
• Reworded or removed mentions of “modules” in reference to device peripherals in system overview.
• Ordered table footnotes in the order in which their references appear in the table.
• Table 4.25 Sub-GHz RF Receiver Characteristics for 915 MHz Band on page 61 - Clarified that 400 kbps reference signal is 4GFSK.
• Corrected the reference signal value in Table 4.19 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 500
kbps Data Rate on page 51 and Table 4.21 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 125 kbps
Data Rate on page 53.
• Corrected the Error vector magnitude parameter in Table 4.22 RF Transmitter Characteristics for 802.15.4 DSSS-OQPSK in the 2.4
GHz Band on page 54.
• Corrected minor typos throughout the document.
Revision 1.2
March 2018
• Added new orderable part numbers in QFN32 packaging.
• Figure 6.4 APORT Connection Diagram on page 172: Corrected OPA output connections to route through "Y" buses.
silabs.com | Building a more connected world.
Rev. 1.4 | 191
SILICON [ SILICON ]
