欢迎访问ic37.com |
会员登录 免费注册
发布采购

510BAA96M0000AAGR 参数 Datasheet PDF下载

510BAA96M0000AAGR图片预览
型号: 510BAA96M0000AAGR
PDF下载: 下载PDF文件 查看货源
内容描述: [SINGLE FREQUENCY XO, OE PIN 2 (O]
分类和应用: 石英晶振
文件页数/大小: 31 页 / 427 K
品牌: SILICON [ SILICON ]
 浏览型号510BAA96M0000AAGR的Datasheet PDF文件第13页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第14页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第15页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第16页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第18页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第19页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第20页浏览型号510BAA96M0000AAGR的Datasheet PDF文件第21页  
Si510/511  
7. PCB Land Pattern: 5 x 7 mm, 4-pin  
Figure 5 illustrates the 5 x 7 mm PCB land pattern for the 5 x 7 mm Si510/511. Table 15 lists the values for the  
dimensions shown in the illustration.  
Figure 5. Si510/511 PCB Land Pattern  
Table 15. PCB Land Pattern Dimensions (mm)  
Dimension  
(mm)  
C1  
4.20  
E
5.08  
1.55  
1.95  
X1  
Y1  
Notes:  
General  
1. All dimensions shown are in millimeters (mm) unless otherwise noted.  
2. Dimensioning and Tolerancing is per the ANSI Y14.5M-1994 specification.  
3. This Land Pattern Design is based on the IPC-7351 guidelines.  
4. All dimensions shown are at Maximum Material Condition (MMC). Least Material Condition  
(LMC) is calculated based on a Fabrication Allowance of 0.05 mm.  
Solder Mask Design  
5. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder  
mask and the metal pad is to be 60 µm minimum, all the way around the pad.  
Stencil Design  
6. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used  
to assure good solder paste release.  
7. The stencil thickness should be 0.125 mm (5 mils).  
8. The ratio of stencil aperture to land pad size should be 1:1.  
Card Assembly  
9. A No-Clean, Type-3 solder paste is recommended.  
10. The recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for  
Small Body Components.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
17  
Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 29, 2021  
 复制成功!