5. Test Circuit:
VDD
VDD
IC
IC
IC
IC
R
R
C2
C1
3-PIN
IC
1/6TC4069UBE
2
2-PIN
VDD
R
+5V 0.1V
1M
C1 C2
30PF
6. Physical and Environmental Characteristics:
No
Item
Condition
Result
Force of 1kg is applied to each lead in axial
direction, keep for 10sec, then force of 0.5kg
is applied to each lead in aerial direction. The
Terminal
strength
Non-evident
6-1
lead shall be bend 90
degree in one damage.
direction, then in the opposite direction and
return to normal.
Lead terminals are immersed up to 2.0mm of
body in a solder bath (260±5 ), keep for
5±0.5sec, then return to normal temp. For
24±2hrs.
Temp:-55~+85 , 5cycles, keep for 30min,
return to normal temp, for 24±2hrs.
Vibration:frequency:10~55Hz,
Non-evident
Resistance to
soldering heat
damage and meet
table-1, the mark
is clear.
6-2
6-3
Thermal shock
Vibration
Non-evident
damage and meet
table-1, the mark
is clear.
amplitude:1.5mm, keep for 6hrs
Shock
High
temperature
Damp &
heat(cyclic)
Low
temperature
Low air
pressure
Va: 294m/s2, pulse time: 18ms
Temp: +85 , keep for 16hrs.
Non-breakthrough,
or arc and meet
table-1,
non-evident
damage the mark
is clear.
Trial Db, the first circle
Temp: -55 , keep for 2hrs.
Air press: 8.5kPa keep for 2hrs.
6-4
Damp & heat Trial Db, the rest cycles, return to normal
(cyclic)
temp for 24±2hrs.
Non-evident
damage, the mark
Temp: 40±2 , humidity: 90~95%. Keep for
500hrs, return to normal temp for 24±2hrs.
Damp & heat
(steady state)
6-5
6-6
is
clear,
meet
table-1.
Temp:+85 , keep for 1000hrs, return to
normal temp for 24±2hrs.
Life test
Meet table-1.
SHOULDER [ SHOULDER ELECTRONICS LIMITED. ]
