SAW FILTER
HDMIF389A5Dc SIP5Dc
measurement shall be made. Test board shall be
1.6 mm thick. Base material shall be glass fabric
base epoxy resin.
Solder ability Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of
for 5 sec.
total area of the
pins should be
covered with solder
焊锡覆盖面积大于
95%
3.4 Mechanical Test
Items
Conditions
Specifications
Vibration
600-3300rpm amplitude 1.5mm
3 directions 2 H each
There shall be no
damage.
Drop
Lead pull
On maple plate from 1 m high 3 times
Pull with 1 kg force for 30 seconds
90o bending with 500g weigh 2 times
Lead bend
3.5 Voltage Discharge Test
Item
Surge
Condition
Between any two electrode
Specifications
There shall be no
damage
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn
Page 7 of 11
SHOULDER [ SHOULDER ELECTRONICS LIMITED. ]
