SAW FILTER
HD F4552
6.Mechanical Test
Items
Conditions
Specifications
Vibration
600-3300rpm amplitude 1.5mm
3 directions 2 H each
There shall be no
damage.
Drop
Lead pull
Lead bend
On maple plate from 1m high 3 times
Pull with 1kg force for 30 seconds
90o bending with 500g weigh 2 times
7. REMARK
7.1 Static voltage
Static voltage between signal load & ground may cause deterioration &destruction of
the component. Please avoid static voltage.
7.2 Ultrasonic cleaning
Ultrasonic vibration may cause deterioration & destruction of the
Please avoid ultrasonic cleaning
component.
7.3 Soldering
Only leads of component may be soldered. Please avoid soldering another part of
component.
8. Packing
8.1 Dimensions
(1) Carrier Tape: Figure 1
(2) Reel: Figure 2
(3) The product shall be packed properly not to be damaged during transportation and storage.
8.2 Reeling Quantity
1000 pcs/reel 7’’
3000 pcs/reel 13’’
8.3 Taping Structure
(1) The tape shall be wound around the reel in the direction shown below.
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn
Page 10 of 13
SHOULDER [ SHOULDER ELECTRONICS LIMITED. ]
