欢迎访问ic37.com |
会员登录 免费注册
发布采购

HDF173.075M 参数 Datasheet PDF下载

HDF173.075M图片预览
型号: HDF173.075M
PDF下载: 下载PDF文件 查看货源
内容描述: [Passive Filter]
分类和应用:
文件页数/大小: 6 页 / 136 K
品牌: SHOULDER [ SHOULDER ELECTRONICS LIMITED. ]
 浏览型号HDF173.075M的Datasheet PDF文件第1页浏览型号HDF173.075M的Datasheet PDF文件第2页浏览型号HDF173.075M的Datasheet PDF文件第3页浏览型号HDF173.075M的Datasheet PDF文件第4页浏览型号HDF173.075M的Datasheet PDF文件第6页  
SAW FILTER  
HDF173.075M F11  
4.Test circuit  
L1 , L2 , C1 , C2 is TDB  
5.Reliability  
5.1Drop Test : The components shall remain within the electrical specifications after soldered in  
the PCB board of the model of pager about 100 gs weight, and then loaded 30 trials of matural  
dropping from the height of 1.2 meters on to an board.  
5.2Vibration Fatigue: The components shall remain within the electrical specifications after loaded  
vibration at 10-120Hz , amplitude 1.5 mm , X, Y, Z, direction ,for 2 hours.  
5.3Terminal Strength: The components shall remain within the electrical specifications after pulled  
2 Kgs weight for 10 seconds towards an axis of each terminal.  
5.4High Temperature Storage: The components shall remain within the electrical  
specifications after being kept at the 85 ±2for 960 Hours, then kept at room temperature for  
2 hours.  
5.5Low Temperature Storage: The components shall remain within the electrical specifications  
after being kept at the -25 ±2for 960 Hours, then kept at room temperature for 2 hours.  
5.6Temperature Cycle: The components shall remain within the electrical  
specifications after 5 cycles of high and low temperature testing ( one cycle: 80 for 30  
minutes 25for 5 minutes -25for 30 minutes ) than kept at room temperature for 2 hours.  
5.7 Humidity Test : The components shall remain within the electrical specification  
after being kept at the condition of ambient temperature 40±2,and 9095%  
RH for 960±5hours,then kept at room temperature and normal humidity for 1.5  
hours .  
5.8 Solder-heat Resistance : The components shall remain within the electrical  
specifications after dipped in the solder at 350±5for 5 ± 1seconds,then kept at room  
temperature for 10 mins.(Terminal must be dipped leaving 1.5 mm from the case).  
5.9 Solderability : Solderability of terminal shall be kept at more than 80% after  
dipped in the solder flux at 230 ±5for 5±1 seconds.  
5.10 orage: The components shall meet the electrical and mechanical specifications after 5 years  
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn  
Page 5 of 6