SAW FILTER
HDAF45A3Dc SIP5Dc
3
4
5
6
-40℃=>+85℃
+85℃
+85℃=>+25℃
+25℃
2h
4h
0.5h
1h
Resistance to Reflow soldering method
Soldering
heat
Peak: 255 ±5 ℃, 220±5℃, 40s
At electrode temperature of the specimen.
The specimen shall be passed through the reflow
furnace with the condition shown in the above
profile for 1 time.
The specimen shall be stored at standard
atmospheric conditions for 1h, after which the
measurement shall be made. Test board shall be
1.6 mm thick. Base material shall be glass fabric
base epoxy resin.
Solder ability Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of
for 5 sec.
total area of the
pins should be
covered with solder
3.4Mechanical Test
Items
Conditions
Specifications
Vibration
600-3300rpm amplitude 1.5mm
3 directions 2 H each
Drop
On maple plate from 1m high 3 times
There shall be no
damage.
Lead pull
Lead bend
Pull with 1kg force for 30 seconds
90o bending with 500g weigh 2 times
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn
Page 6 of 7
SHOULDER [ SHOULDER ELECTRONICS LIMITED. ]
